Engine/Power - EJ20T (pre-2006 WRX and JDM) There is replacement for displacement, it is forced induction - OEM 2.0 liter turbo engines in the USDM WRX. 90-94 Legacy Turbo EJ22 turbo engines can also be discussed here.

Help!!! Vacuum Leak!

Thread Tools
 
Search this Thread
 
Old 03-08-2008, 11:35 AM
  #1  
Registered User
Thread Starter
iTrader: (15)
 
wrxisthebest's Avatar
 
Join Date: Jun 2007
Location: Arnold, CA
Posts: 9,171
Car Info: 2003 PSM WRX, 80 Brat ready for Chevy 350 Swap.
Help!!! Vacuum Leak!

ok... so i pulled a CEL last night for "system too rich (bank 1)" i am almost positive it is a vacuum leak.. but i cant find it! i pulled the tmic off, no problems down there, i checked all the lines to the intake, i checked all the lines off the turbo, and i even made sure the line to my boost gauge was on tight. any other spots i should look at?
wrxisthebest is offline  
Old 03-08-2008, 12:47 PM
  #2  
9 to 5 mod
iTrader: (6)
 
sigma pi's Avatar
 
Join Date: Jan 2003
Location: Chavez Ravine
Posts: 57,386
Car Info: 03 Impreza WRX
honestly this is the worst problem in the world

get a smoke machine or replace the hoses and then go for gaskets
sigma pi is offline  
Old 03-08-2008, 12:58 PM
  #3  
Registered User
Thread Starter
iTrader: (15)
 
wrxisthebest's Avatar
 
Join Date: Jun 2007
Location: Arnold, CA
Posts: 9,171
Car Info: 2003 PSM WRX, 80 Brat ready for Chevy 350 Swap.
OMG!!!

ok.. so i took it for a drive, it still is happeneing... right now im gunna let it cool off. and then re do the TMIC hoses.. but after that i dont know where to go until monday when i can get my hands on a smoke tester..
wrxisthebest is offline  
Old 03-08-2008, 12:59 PM
  #4  
Registered User
Thread Starter
iTrader: (15)
 
wrxisthebest's Avatar
 
Join Date: Jun 2007
Location: Arnold, CA
Posts: 9,171
Car Info: 2003 PSM WRX, 80 Brat ready for Chevy 350 Swap.
the BPV gasket is brand new btw
wrxisthebest is offline  
Old 03-08-2008, 01:20 PM
  #5  
Registered User
iTrader: (46)
 
03_Impreza_Al's Avatar
 
Join Date: Nov 2006
Location: "Streets Closed, Pizza Boy"
Posts: 8,803
Car Info: www.pinoymamba.tumblr.com
whats your vacuum at?
03_Impreza_Al is offline  
Old 03-08-2008, 01:22 PM
  #6  
Registered User
Thread Starter
iTrader: (15)
 
wrxisthebest's Avatar
 
Join Date: Jun 2007
Location: Arnold, CA
Posts: 9,171
Car Info: 2003 PSM WRX, 80 Brat ready for Chevy 350 Swap.
when at idle??

like around 17-18 Hg
wrxisthebest is offline  
Old 03-08-2008, 01:30 PM
  #7  
Registered User
iTrader: (46)
 
03_Impreza_Al's Avatar
 
Join Date: Nov 2006
Location: "Streets Closed, Pizza Boy"
Posts: 8,803
Car Info: www.pinoymamba.tumblr.com
how are the 02 sensors looking?

replace all your vacuum hoses good luck.

also check the hoses to the intake. Is the box closed properly?

Last edited by 03_Impreza_Al; 03-08-2008 at 01:32 PM.
03_Impreza_Al is offline  
Old 03-08-2008, 01:54 PM
  #8  
Registered User
Thread Starter
iTrader: (15)
 
wrxisthebest's Avatar
 
Join Date: Jun 2007
Location: Arnold, CA
Posts: 9,171
Car Info: 2003 PSM WRX, 80 Brat ready for Chevy 350 Swap.
O2 sensors dont look bad.. like normal..

the hoses on the intake i am currently checking and replacing the belted hose clamps.

i just reclosed the box.
wrxisthebest is offline  
Old 03-31-2008, 05:11 PM
  #9  
Registered User
 
wrx'd's Avatar
 
Join Date: Mar 2008
Location: the capitol of TEXAS
Posts: 8
Car Info: 03 WRX
get a can of brake cleaner, or carb cleaner,
while the car is idleing spray SPARINGLY
as in very very little amounts around all your vacuum lines
you will find the area of the leak when the car idles up !
its a great way to find the leak but b careful brake cleaner is very flamable
wrx'd is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
hloh
Subaru General
6
01-19-2010 04:56 PM
silver_wrx
Suby Shopping & Maintenance/Warranty
2
08-01-2006 03:20 PM
circaisdashiat
Engine/Power - non turbo (All non turbo Imprezas)
7
09-29-2005 04:31 PM
lin_tp2
Engine/Power - EJ20T (pre-2006 WRX and JDM)
6
03-03-2005 11:39 PM
DetailAddict
Bay Area
35
11-23-2004 01:18 PM



Quick Reply: Help!!! Vacuum Leak!



All times are GMT -7. The time now is 02:46 AM.