HI

i need your help, i'm from israel and i have orderd some parts frome a diller in the u.s.a and he c'ant seem to find the spec for my car model.

my car is an impreza GT 1999 (AWD)
the diller told me he dosent know this model. but he did told me that he thinks the parts are the same as the WRX 2002 or subaru leagcy 1999.

1. i would like to know what is the spec for front and back rotors for WRX 2002 / IMPREZA GT 1999 ?

2. what is the spec for a clutch system + flywheel for subaru leagcy GT 1999 / impreza GT 1999 ?

THANKS ELAD

 

Hi Elad, The model of your car should be under the bonnet stamped on a metal plate,

If unsure of your exact model remove a brake rotor and measure it. Measure the overall Diameter, the Hat height (If rotor laying on table measure from the table to the top of small, 58mm centre hole). The minimum thickness is on the underside of the rotor.

Some examples are,

1999 Impreza AWD, Front (vented) 260 diameter
57mm hat height
24mm new
22mm minimum
Rear (solid) 266mm diameter
67.5mm hat height
10mm new
8.5mm minimum

Legacy GT (on change over year)
Front (vented) 277mm diameter
57mm hat
24mm new
22mm minimum
Rear (vented) 266mm diameter
67.5mm hat height
18mm new
16mm minimum

Rear (solid) 290mm diameter
67.5mm hat height
10mm new
8.5mm minimum

2002 WRX Front (vented) 295mm diameter
57.5mm hat height
25mm new
23mm minimum

Rear (vented) 290mm diameter
67.5mm hat height
18mm new
16mm minimum

Some WRX (USA) model has a solid rear rotor

Rear (solid) 266mm diameter
67.5mm hat
10mm new
8.5 mm minimum

 

thanks

do you spec for the clutch system all so ?

 

it's an ej20