re torque head to 90 ft lbs.

check valve lash with the head torque down. right side looks good and the left side i need to mic 006 so i can order the right size bucket. or 006 is fine to run?


waited two weeks to get 2 new valve lifter bucket. recheck lash on intake .008-.007 in and exhaust .010-.011 in

 

painted the valve cover with vht wrinkle black.





installed new tires Bfg sport comp2

 

Coming along nicely. Good stuff.

 

thanks. still need to pick up bigger injector and get a break in map from Travis.

 

cobb sti adjustable short shifter

 

recent pic , added jdm grille and fog light cover .

 

^ very clean.

 

thanks. adding brembo slotted rotors wrx 4pot and h&r coilovers this week pics coming soon .

 

h&r coilvers installed , the ride is really stiff, its making me feel sea sick on the freeway .

installed front and rear camber bolts and set toe .

Painted 4 pot wrx and brembo rotors installed

 

got a Feal 411 coilovers , the h&r is really stiff and its killing my organs specially when im driving on the free way . the Feal 411 is better , damping adjustment and the ride height adjustment is easy to set . Stick with struts and spring !!!

 

Jdm engine coming out for the stroker engine .

 

sticky varnish residue in the manifold from running e85 for 2 years.

 

tgv delete and preping intake manifold for wrinkle paint black .

 

Jdm engine is out.

tgv delete

port match tgvs

timing belt component installed

thanks to Travis@snailperformace for the base map hopefully i get everything ready and running this weekend .

 

act 6 puck installed and drop the engine in. i have to grind the engine housing to fit the fp green htz. water pipe and compressor housing is hitting the top of the engine where the transmission get bolted .


too much modification just to fit the turbo.