WRX/STI M Trim and Top mount
#1
Registered User
Thread Starter
iTrader: (3)
Join Date: Jan 2006
Location: 18355 E Girard Ave Aurora CO 80013
Posts: 292
Car Info: 2002 WRX, 2004 STI, 2008 WRX, and a Conquest ;)
WRX/STI M Trim and Top mount
$1850 plus shipping on this awesome package
This bar and plate intercooler measures in at 20" x 7.5" x 4.5" and fits all 2000 and up Subaru WRX and STi's. Its rated at over 2 1/2 times the internal volume of the factory core. It's a direct replacement for the factory top mount intercooler. This kit also includes the "Y" pipe, silicone elbow, gaskets, bolts and clamps.
Specifications:
Inlet Temp: 350F
Outlet Temp: 100F
Ambient Air Temp: 85F
Inlet Pressure: 18 psi
Outlet Pressure: 17.5 psi
Mass Flow: 40lbs/min
Turbo is the Borg Warner based M Trim bolt on that supports 400whp, this is a sleve bearing turbo so it will need to be primed on installation. Oil and coolant lines are not included and will need to be transplanted from your stock turbo.
This bar and plate intercooler measures in at 20" x 7.5" x 4.5" and fits all 2000 and up Subaru WRX and STi's. Its rated at over 2 1/2 times the internal volume of the factory core. It's a direct replacement for the factory top mount intercooler. This kit also includes the "Y" pipe, silicone elbow, gaskets, bolts and clamps.
Specifications:
Inlet Temp: 350F
Outlet Temp: 100F
Ambient Air Temp: 85F
Inlet Pressure: 18 psi
Outlet Pressure: 17.5 psi
Mass Flow: 40lbs/min
Turbo is the Borg Warner based M Trim bolt on that supports 400whp, this is a sleve bearing turbo so it will need to be primed on installation. Oil and coolant lines are not included and will need to be transplanted from your stock turbo.
Thread
Thread Starter
Forum
Replies
Last Post
Lazyboy
Conversions, Transplants, & Swaps
6
12-08-2006 08:06 AM
Antonio85
Engine/Power - EJ20T (pre-2006 WRX and JDM)
2
06-24-2005 10:24 AM