Installed CAI and car stalls immediately please help!
Guest
Posts: n/a
Installed CAI and car stalls immediately please help!
I just installed an AEM CAI.. i had no instructions.. 2 pipes, 1 filter, anyone can do it.. right now the car is jacked up in the front and 1 wheel isn't on.. when i start the car, it turns off immediately.. i know i didn't disconnect anything (except the battery when installing) but i'm wondering if there's a sensor that doesn't let your car start when 1 wheel isn't on?.. either way, i came home for the weekend to install this on my car and i need to get it working by tomorrow.. any help or suggestions will be greatly appreciated.. if anyone can throw me a quick response on AIM, my sn is c4ffeineaddict, thanks.
Registered User
iTrader: (14)
Joined: Jan 2003
Posts: 1,224
From: Honolulu, HI
Car Info: 1991 Toyota MR-2 Turbo
Originally posted by wickedwrx02
OK, I know what the MAF is, I know what it looks like, and YES it is connected... now i really have no idea why it's not working
OK, I know what the MAF is, I know what it looks like, and YES it is connected... now i really have no idea why it's not working
If you never disconnected it and just left it hanging there while installing your CAI; you could have damaged it. The sensor is very fragile and when installing an intake it is a good idea to unplug it, remove it and immediately bolt it up to the new intake pipe.
Registered User
iTrader: (2)
Joined: Nov 2002
Posts: 1,644
From: Lawrence, Kansas
Car Info: 19' Impreza Sport Manual / 99 Miata / 13' OB
It's all sorted out now It seems the tube that holds the MAF can be installed either way (he had no directions w/ the intake). The MAF was in the tube properly (it only goes in one way) but the tube was 180°, so it was not reading properly. The tube just needed to be flipped around.
Peaty
It seems the tube that holds the MAF can be installed either way (he had no directions w/ the intake). The MAF was in the tube properly (it only goes in one way) but the tube was 180°, so it was not reading properly. The tube just needed to be flipped around.Peaty
VIP Member
iTrader: (14)
Joined: May 2003
Posts: 8,675
From: Wherever Sucks the Most
Car Info: 2003 WRX, 2008 Camry
Thread
Thread Starter
Forum
Replies
Last Post
wei8532
Engine/Power - EJ25T (STI and 2006+ WRX)
12
May 25, 2006 10:49 AM
jerms
Suby Shopping & Maintenance/Warranty
1
Jun 25, 2005 12:46 PM
gpatmac
Teh Politics Forum
68
Jan 24, 2005 01:39 PM
