ATP Dyno Day 5-29-04 Results
#1
more than meets the eye
Thread Starter
iTrader: (14)
Join Date: Nov 2003
Location: Bay Area
Posts: 6,054
Car Info: ?
ATP Dyno Day 5-29-04 Results
Post yours here...
here are mine:
mods:
Helix uppipe
Helix downpipe
stock catback (waiting for my stromung catback to arrive)
stock ECU (waiting for accessport to arrive)
here are mine:
mods:
Helix uppipe
Helix downpipe
stock catback (waiting for my stromung catback to arrive)
stock ECU (waiting for accessport to arrive)
#4
ummm i think i got to 259.8hp and cant remember the torque. Its aiiight.
Im on VF34 and supporting mods with the Ecutek.
Im on VF34 and supporting mods with the Ecutek.
Last edited by MidniteBlakRex; 05-29-2004 at 06:57 PM.
#8
2006 Mt Hammy Car Show Winner
iTrader: (11)
Join Date: Dec 2002
Location: Danville, CA
Posts: 2,730
Car Info: Black 03 WRX, White 04 E46 M3
Originally Posted by international B
i wanna see more numbers. too bad i couldnt make it out, bill, chris and some folks were getting ready to leave as i was driving home.
#11
All of those readings are not really that accurate. What I mean is that they are SAE, which is the reading at the fly wheel. So subtract about 15% of whatever you dyno at and that would be a more accurate reading. So for example, if you go 200hp and 200lbs torque SAE, then you really are at about 170hp and 170lbs torque.
#13
2006 Mt Hammy Car Show Winner
iTrader: (11)
Join Date: Dec 2002
Location: Danville, CA
Posts: 2,730
Car Info: Black 03 WRX, White 04 E46 M3
Originally Posted by Littleboyblue
All of those readings are not really that accurate. What I mean is that they are SAE, which is the reading at the fly wheel. So subtract about 15% of whatever you dyno at and that would be a more accurate reading. So for example, if you go 200hp and 200lbs torque SAE, then you really are at about 170hp and 170lbs torque.