I want to lower my car but idk how to do it. i have the springs i just need someone to help me out. i live in cen cal.

 

Hmm.... To really summarize it all, you'll have to take the shock assembly out, take it apart, swap the springs, and put it back in. If you go to ScoobyMods, they have a pictorial/written walk through that can give you an idea what type of work is needed.

 

tighten the top nut by hand...
i learned that lesson after i got a lil too torque drill happy.

 

where in Cen Cal? I'm near Monterey and have done springs many times

 

los banos

 

ya but you have to watch out for the springs cause they have a lot of pressure on them.

 

Yeah. It really isn't bad. Just need an impact wrench/air tools.

 

You are correct. Spring compressor is helpful.

 

Supposedly you can do WRX springs without a compressor, but I always do it the safe way and use the compressor

Air tools suck with the spring compressors, a regular ratchet is much better so you can do it all evenly

 

Take it to a shop or have a friend who's done it before help you.


- Andrew