Help! Can't disarm my stock alarm, '02
#1
Registered User
Thread Starter
Join Date: Jun 2007
Location: Brentwood, NorCal
Posts: 6
Car Info: '02 WRX
Help! Can't disarm my stock alarm, '02
Hey everybody, here's the deal: my car's been on jackstands for awhile and the battery died. Now when I try to jump start it the stock alarm goes off. I can't disarm it even with new batteries in the remotes. I do have an aftermarket alarm installed but I've had it for over 4 years. In the past, the stock alarm would only go off if the aftermarket was armed with a door still open, when this happened all I had to do was disarm it with the remote for the stock alarm. It's an '02, thanks for the help.
NEVER MIND, FIXED IT! THANKS.
NEVER MIND, FIXED IT! THANKS.
Last edited by mikasa; 02-25-2008 at 04:58 PM. Reason: i fixed the problem
#2
Registered User
Thread Starter
Join Date: Jun 2007
Location: Brentwood, NorCal
Posts: 6
Car Info: '02 WRX
Update. So I unplugged the stock security module by the e brake so I can drive it but now the aftermarket alarm isn't working either, it still locks and unlocks the doors and the siren will sound when the panic button is pushed but I can't set the alarm off when it is supposedly armed.
Thread
Thread Starter
Forum
Replies
Last Post
slim617
Car Lounge
7
06-09-2007 09:38 PM
Soobie22
Stereo & Security
1
07-08-2005 03:48 AM