Factory Alarm
Registered User
Joined: Dec 2002
Posts: 68
I installed a Clifford AvantGuard 4. I would not recommend anyone installing this unit by themselves unless they have experience installing alarms.
you can bypass the alarm by not using it. only the remote activates the alarm or the doors locking. if you install keyless entry with ur new alarm then you can hold down lock and unlock at the same time on your subaru remote and it will disable the Beep coming from your horn.
you can bypass the alarm by not using it. only the remote activates the alarm or the doors locking. if you install keyless entry with ur new alarm then you can hold down lock and unlock at the same time on your subaru remote and it will disable the Beep coming from your horn.
Registered User
iTrader: (2)
Joined: Nov 2002
Posts: 1,644
From: Lawrence, Kansas
Car Info: 19' Impreza Sport Manual / 99 Miata / 13' OB
Registered User
iTrader: (2)
Joined: Nov 2002
Posts: 1,644
From: Lawrence, Kansas
Car Info: 19' Impreza Sport Manual / 99 Miata / 13' OB
You'll be unpluging two harness plugs from two relays. on my Forester install one of the harnesses had a jumper and the other is just there, not plugged into anything. Not sure how the impreza was at first:
more shots here:
http://www.scoobymods.com/forums/sho...&threadid=2105
more shots here:
http://www.scoobymods.com/forums/sho...&threadid=2105
Thread Starter
Registered User
Joined: May 2003
Posts: 175
so after i unplug the harness, i use the jumper wires to connect pin 2 and pin 6 together to bypass the system? i dont need to buy a special harness do i?
peaty, the link shown is for a forester right? and the system on the wrx is next to the e brake not behind the glove box?
peaty, the link shown is for a forester right? and the system on the wrx is next to the e brake not behind the glove box?
Registered User
iTrader: (2)
Joined: Nov 2002
Posts: 1,644
From: Lawrence, Kansas
Car Info: 19' Impreza Sport Manual / 99 Miata / 13' OB
You are right the WRX one is located as per the PDF, I think there are pics of the WRX setup on our site too.
Here found it:
http://www.scoobymods.com/forums/sho...&threadid=1900
I don't see a jumper though is there one with the WRX? Anyone?
Here found it:
http://www.scoobymods.com/forums/sho...&threadid=1900
I don't see a jumper though is there one with the WRX? Anyone?
Guest
Posts: n/a
if you installed the Subaru Security Upgrade system yourself then you will know what happened to the plug. otherwise it may or may not be there depending on the installer at he port or dealership.
if you don't plan on selling off the Subaru Security Upgrade system you can leave the Starter Kill relay since it's normally closed. Otherwise you will need to bug your dealership to give you a plug then.
netZ
if you don't plan on selling off the Subaru Security Upgrade system you can leave the Starter Kill relay since it's normally closed. Otherwise you will need to bug your dealership to give you a plug then.
netZ
Originally posted by Peaty
You are right the WRX one is located as per the PDF, I think there are pics of the WRX setup on our site too.
Here found it:
http://www.scoobymods.com/forums/sho...&threadid=1900
I don't see a jumper though is there one with the WRX? Anyone?
You are right the WRX one is located as per the PDF, I think there are pics of the WRX setup on our site too.
Here found it:
http://www.scoobymods.com/forums/sho...&threadid=1900
I don't see a jumper though is there one with the WRX? Anyone?
Thread
Thread Starter
Forum
Replies
Last Post
blue04WRX
Stereo & Security
9
Jul 11, 2010 10:35 PM
CCPro
Bay Area
6
Dec 22, 2005 06:27 PM
Soobie22
Stereo & Security
1
Jul 8, 2005 03:48 AM
