I Have a Leak

Thread Tools
 
Search this Thread
 
Old Oct 4, 2015 | 10:50 AM
  #1  
anthonyh99's Avatar
Thread Starter
Registered User
 
Joined: Dec 2014
Posts: 7
From: Sacramento, CA
Car Info: Subaru 2004 WRX Wagon
I Have a Leak (VIDEO)

04' WRB WRX Wagon

Before the long dick of the law caught up with me I was happily Stage 2

Cross Pipe

Up Pipe

Down Pipe

Catback

Silicon Intercooler Hoses

& a few other little tidbits.

Finally was cleared by the Referee and now I'm ready to start putting it all back on.

While I was stock I had/have what I thought was a boost leak.

I put the stock IC hoses back on so I assumed it was a leak from there.

I've gotten around to putting back on my silicon hoses and that didn't fix it.

I thought maybe it was the down pipe so I unbolted it and re-bolted it back up.

Still got the leak somewhere.

It's worse in the cold mornings before she's warmed up. The turbo starts to spool as normal and then I get a loud squeal.

The more gas I give it, the louder it is.

Does anyone have an idea of what else I can check?

Or if you wanna drop by I'm not opposed to that either.

Thanks!

Last edited by anthonyh99; Oct 5, 2015 at 07:58 AM.
Old Oct 4, 2015 | 04:29 PM
  #2  
dthack03's Avatar
Registered User
iTrader: (6)
 
Joined: Sep 2009
Posts: 458
From: DT sac
Car Info: bugeye
Take some close up pictures in the engine bay. Does the noise occur at higher engine speed under load or just revving the car? Check vacuum lines between the inlet and the power steering pump as well as around the bpv and bcs. Loud squeal doesn't sound good though. If it's a vacuum/boost leak if you can't smoke test it bring it to FW and have them smoke the intake. You probably have more leaks than you think, the vacuum lines gets hard and then when moved about crack in the bends where you will never notice by normal means
Old Oct 4, 2015 | 04:58 PM
  #3  
Brfatal's Avatar
Technical Know-It-All
 
Joined: Oct 2003
Posts: 2,123
From: Sterling, VA
Car Info: '02 WRX + '15 WRX
Most common vacuum/boost leaks are from y-pipe and the BPV/BOV. Are you sure that's what it is though? Do you know anyone with a leak tester?
Old Oct 5, 2015 | 07:55 AM
  #4  
anthonyh99's Avatar
Thread Starter
Registered User
 
Joined: Dec 2014
Posts: 7
From: Sacramento, CA
Car Info: Subaru 2004 WRX Wagon
Originally Posted by dthack03
Does the noise occur at higher engine speed under load or just revving the car?
Thanks for the tips!

It happens only when I'm on boost, if I climb in RPM slowly I can avoid it, but as soon as I get on boost then that's when I hear it. I was able to test it when I had my AP connected and as soon as I hear the leak my boost pressure just drops.

Here's a link to the video.

Old Oct 5, 2015 | 08:04 AM
  #5  
stupidchicken03's Avatar
Churro Aficionado
iTrader: (38)
 
Joined: Feb 2008
Posts: 54,661
From: IG - @thomas.teammoist
Car Info: IG - @TEAMMOISTOFFICIAL
Have you checked your turbo inlet?
Old Oct 5, 2015 | 02:11 PM
  #6  
dthack03's Avatar
Registered User
iTrader: (6)
 
Joined: Sep 2009
Posts: 458
From: DT sac
Car Info: bugeye
^^ this
Old Oct 5, 2015 | 03:07 PM
  #7  
anthonyh99's Avatar
Thread Starter
Registered User
 
Joined: Dec 2014
Posts: 7
From: Sacramento, CA
Car Info: Subaru 2004 WRX Wagon
Originally Posted by stupidchicken03
Have you checked your turbo inlet?
I'll check that and get back with the results. Thanks for the heads up!
Old Oct 6, 2015 | 06:43 AM
  #8  
stupidchicken03's Avatar
Churro Aficionado
iTrader: (38)
 
Joined: Feb 2008
Posts: 54,661
From: IG - @thomas.teammoist
Car Info: IG - @TEAMMOISTOFFICIAL
I know when I had a tear in the inlet, it sounded like a supercharger
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
vayrogar
Bay Area
10
Mar 16, 2012 07:45 PM
snaggleto0th
Central Valley
2
Sep 12, 2010 09:54 PM
brucelee
Bay Area
2
Aug 2, 2010 09:39 PM
ScoobyRoo20
Engine Management
2
Sep 9, 2003 04:43 PM
bigdaddy
Engine/Power - EJ20T (pre-2006 WRX and JDM)
1
Jul 10, 2003 12:09 PM




All times are GMT -7. The time now is 12:05 PM.