Looking for a Used EJ18
Thread Starter
Registered User
iTrader: (11)
Joined: Sep 2003
Posts: 1,264
From: In my BUBBLE
Car Info: Rust bucketo
Looking for a Used EJ18
Looking for a used Ej18 motor..
Mine is worn out. Any tips or suggestions on where to find one is greatly appreciated. (junkyards?)
Thanks.
-Dan
Mine is worn out. Any tips or suggestions on where to find one is greatly appreciated. (junkyards?)
Thanks.

-Dan
Registered User
iTrader: (2)
Joined: Sep 2006
Posts: 1,049
From: Ewa Beach Hawaii
Car Info: 2015 CWP STI
. Same for the EJ22's there
. You should definitely grab an EJ22, it should be safe to run on the EJ18 ECU. You can also run an EJ25D (96-98) on the EJ18 ECU but you'll need a piggyback (GReddy Emanage) to push or pull more fuel and timing.
Thread Starter
Registered User
iTrader: (11)
Joined: Sep 2003
Posts: 1,264
From: In my BUBBLE
Car Info: Rust bucketo
A shortblock would have been nice. lol.
I need a manual trans for anything other than a Ej18 to bolt up to the existing auto trans, correct?
This is actually going into a 94' FWD impreza. I would rather have an AWD one but it's not in my best interest to convert everything nor do I want to go to california to find a nice chassis to work on
With 120k on the odometer and an instance where the motor was run dry of oil for at least a minute or two, my little putt-putt ej18 needs a rebuild.. but it may just be easier altogether to search for a small upgrade.
I think I may have to do more research but it doesn't look like I have that may options with the stock automagic. hmm?
I need a manual trans for anything other than a Ej18 to bolt up to the existing auto trans, correct?
This is actually going into a 94' FWD impreza. I would rather have an AWD one but it's not in my best interest to convert everything nor do I want to go to california to find a nice chassis to work on

With 120k on the odometer and an instance where the motor was run dry of oil for at least a minute or two, my little putt-putt ej18 needs a rebuild.. but it may just be easier altogether to search for a small upgrade.
I think I may have to do more research but it doesn't look like I have that may options with the stock automagic. hmm?
VIP Member
iTrader: (39)
Joined: Jun 2005
Posts: 4,939
From: Seibukan Dojo /HI. Kendo Federation
Car Info: Seishin-teki kyōkō/Intonjutsu/Shinobi-ir
A shortblock would have been nice. lol.
I need a manual trans for anything other than a Ej18 to bolt up to the existing auto trans, correct?
This is actually going into a 94' FWD impreza. I would rather have an AWD one but it's not in my best interest to convert everything nor do I want to go to california to find a nice chassis to work on
With 120k on the odometer and an instance where the motor was run dry of oil for at least a minute or two, my little putt-putt ej18 needs a rebuild.. but it may just be easier altogether to search for a small upgrade.
I think I may have to do more research but it doesn't look like I have that may options with the stock automagic. hmm?
I need a manual trans for anything other than a Ej18 to bolt up to the existing auto trans, correct?
This is actually going into a 94' FWD impreza. I would rather have an AWD one but it's not in my best interest to convert everything nor do I want to go to california to find a nice chassis to work on

With 120k on the odometer and an instance where the motor was run dry of oil for at least a minute or two, my little putt-putt ej18 needs a rebuild.. but it may just be easier altogether to search for a small upgrade.
I think I may have to do more research but it doesn't look like I have that may options with the stock automagic. hmm?
Hey Dan, you could always do a 18/22 or 18/25 hybrid
or better yet go boosted like mr. joejoe. Oh since your doing a rebuild, maybe some delta cams and some 22(E)?? rockers
Thread
Thread Starter
Forum
Replies
Last Post
Impreza_WRX_STi
Subaru OEM Parts For Sale
2
Jul 18, 2005 02:17 AM
rau
Engine/Power - non turbo (All non turbo Imprezas)
10
Oct 2, 2003 01:41 PM
BAHOOGAS
Aftermarket Forced Induction - Turboed factory NA engines
3
Jan 23, 2003 04:46 AM




