Hey gang,

So i got my AP V2. I put the test connectors together, put the other thing with the 2 wires on to the connector by the test connector. It has no problem flashing the ECU's stock stuff, but when it comes to flashing my MAP. It says something about voltage being too high? 13.0012XXX and then when it goes past that it goes to another problem saying it cannot flash because of the Other connector needs to be connected? Its driving me crazy. Any help would be awesome. When i put the test connectors in my check engine light flashes, and fans kick on and all that jazz.

 

Give cobb a call they can guide you through some checks.I do recall another plug on the right kick panel aswell on my 02 that cobb had me check on aswell not sure what it was but yeah they will be your best help also make sure all electronics are off stereo etc

 

http://forums.nasioc.com/forums/show....php?t=1463773

Similar but ultimately the guy returned for a new one...

 

MUAHHAHAHHA SHE LIVES!!! I unplugged everything replugged it all in, and used a battery charger. and Bam.... tune was loaded in 3 min. I now have launch control and Stage 2.

 

Sweet! Did it just not have enough juice?

 

Well its weird, it was reading 13.1 - 13.5 Volts on the AP, but when i checked post to post it was 12.7? I was confused but none the less, i put it on the charger and BAM it worked. So im happy about it lol.