Engine/Power - EJ25T (STI and 2006+ WRX) Discussions about the USDM 2006+ WRX and WRX STi 2.5 liter turbo flat-four.

Exhaust Fitment Issue

Thread Tools
 
Search this Thread
 
Old 06-04-2006, 02:02 PM
  #1  
Registered User
Thread Starter
iTrader: (1)
 
B 1 AR's Avatar
 
Join Date: Nov 2005
Location: Where The Sun Shines MORE !
Posts: 107
Car Info: 2006 OBP STi
Arrow Exhaust Fitment Issue

Hi guys, i was trying to search exhaust fitment between STi / WRX. I'm not sure if they are interchangeable between STi and WRX. So, what i would like to know is if I bought an exhaust that will originally fit WRX, will they also fit my STi ? That's what i would like to find out. I'm not sure what year of WRX will this exhaust fit into, but my STi is 2006. If they dont fit, which part are actually will prevent them from fitting

Thanks In Advance

Last edited by B 1 AR; 06-04-2006 at 02:37 PM.
B 1 AR is offline  
Old 06-05-2006, 06:55 AM
  #2  
Registered User
 
obsidian06's Avatar
 
Join Date: Jun 2006
Location: KC, KS
Posts: 8
Car Info: '06 OBP WRX
All exhausts should be interchangable from a WRX to a STi. The exhaust layout is exactly the same on each car.
obsidian06 is offline  
Old 06-08-2006, 04:03 PM
  #3  
Registered User
Thread Starter
iTrader: (1)
 
B 1 AR's Avatar
 
Join Date: Nov 2005
Location: Where The Sun Shines MORE !
Posts: 107
Car Info: 2006 OBP STi
After i did my research, i found out that some of the exhaust for WRX wont fit STi due to the transmission size 5MT / 6MT. But Some exhaust does interchangeable between WRX and STi, but one question still remain is does the 2006 STi will have a problem fitting exhaust from a WRX due to the Rear Air Diffuser ??
B 1 AR is offline  
Old 06-08-2006, 04:37 PM
  #4  
Registered User
 
okpanic's Avatar
 
Join Date: Aug 2004
Location: Salinas, ca
Posts: 171
Car Info: 07 Silver Mazdaspeed 3
once you get back to the rear end there are no fitment issues. The wrx and sti use the same muffler just with different exhaust tips on them..... The exhaust hangers are in the same place..... If it is an aftermarket exhaust you will need to be careful about where it sits in relation to the diffuser because the heat might melt the plastic but getting it on shouldn't be a problem
okpanic is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
shaggadelic
Hawaii
4
07-28-2011 11:22 PM
kyoung05
Bay Area
6
01-31-2010 11:40 AM
fliped wrx
Conversions, Transplants, & Swaps
0
06-15-2008 02:15 PM
lophilip
Wheel & Tire
0
01-24-2008 08:32 PM
GDB_Dragun
Engine/Power - EJ20T (pre-2006 WRX and JDM)
6
01-04-2004 09:33 AM



Quick Reply: Exhaust Fitment Issue



All times are GMT -7. The time now is 06:18 PM.