upping boost on '04
upping boost on '04
My friennds brother said that he is running his '04 WRX on 20 pounds of boost. I didn't think this would be possible without running into detonation. He has no upgrades to his fuel system. I mentioned that i wanted to up boost but also upgrade to STI injectors and walbro fuel pump. He said that the ECU wouldn't read the increased fuel delivery, but i figured it would, I am looking for an expert opinion. do i need a new brain if i upgrade fuel delivery and boost, i plan to run a AVR-C not just a mbc
Thanks for helping a NEWBIE
Thanks for helping a NEWBIE
stock wrx turbo can only hold up to 16 psi safely i believe...without upgraded fuel management etc its probably not very safe if it doesnt blow...
newbie too...just what i know so far...
anyoen corect me if im wrong
newbie too...just what i know so far...
anyoen corect me if im wrong
Registered User
Joined: Sep 2004
Posts: 65
From: Long Island
Car Info: 04 Sti swap, VF22 18psi, 255l fule pump,ecutek 93 oct, Full exhaust TXS, Sti ra gears, much more...
I learned my lesson 04 rex with cai, bov and mbc running 17.5lbs of boost. It melted the probe on the egt sensor and now my car runs like crap, until i can fix the turbo. Tom
Registered User
iTrader: (-2)
Joined: Jul 2003
Posts: 829
From: Knoxville, Tennessee
Car Info: 2004 WRX in WR Blue
I run 16.5 in every gear all day long using an Apexi AVC-R ebc. The wrx can handle 18 psi. 20 psi is stupid with no other upgrades. Get ready to buy a new engine.
VIP Member
iTrader: (2)
Joined: Apr 2003
Posts: 9,351
From: pompous douchebag
Car Info: $200,000 sports car
the only really safe way to increase boost on a wrx is a reflash as a minimum. even then, he probably won't see much over 16psi, and it definitely won't be for the entire rpm range.
the wrx engine can handle 20psi just fine, as long as it's from an upgraded turbo that isn't blowing extremely hot air, and has upgraded fuel injectors, exhaust, ecu, etc...
the stock ecu will not work properly with larger injectors, another reason reflashing or other engine management is necessary.
the wrx engine can handle 20psi just fine, as long as it's from an upgraded turbo that isn't blowing extremely hot air, and has upgraded fuel injectors, exhaust, ecu, etc...
the stock ecu will not work properly with larger injectors, another reason reflashing or other engine management is necessary.
VIP Member
iTrader: (2)
Joined: Nov 2002
Posts: 3,639
From: Longing for my ol' white '02 WRX :(
Car Info: 2016 Acura RDX ... meh. Um, nice subwoofer?
Originally Posted by Cyrus923
I run 16.5 in every gear all day long using an Apexi AVC-R ebc. The wrx can handle 18 psi.
yeah i ran my car once up to 1.7 bar with the stock turbo i just re did a few lines and it was fast as could be. im not going to tell you how, youll blow your motor up. i only did two pulls but it was fun.
Thread
Thread Starter
Forum
Replies
Last Post
yzercyber
Suby Shopping & Maintenance/Warranty
11
Aug 12, 2005 03:42 PM
mattr762
Engine/Power - EJ20T (pre-2006 WRX and JDM)
6
Apr 18, 2003 09:12 AM
XwrxX
Aftermarket Forced Induction - Turboed factory NA engines
0
Dec 17, 2002 07:14 AM



