i was putting on my samco intercooler hoses and an aps blow off valve today and i ran out of clamps for the hoses. well to make a long story short i threw my intercooler in and plugged the recirculation hose with the plug from my turbo xs blow off valve and let the blow off valve just sit there but i was hooked to the intercooler. Anyway the store was just a few blocks away but on the way back i got a cel. anyway to fix this or what may have caused this

 

I hooked up my blitz bov the same way. A large plug in the return hose, and it worked out just fine. As for the cel, sometimes a minor mistake in installation will trow them. It happened to me while installing my boost controller. No big deal, just reset the ecu, and try again, I't when you throw them consistantly, or when you have a flashing cel that problems will occur.

I don't want to insult your intelligence but some people don't know. so to reset your ecu simply disconnect the ground from your battery, press the brake pedal a few times and reconnect, the light will go away unless there is still a problem. Again if you already know this don't take it as an insult, just trying to help.