You're realtime and basemaps for the '04 STi AccessPORT are incorrect. The Stage 2 93oct basemap is the same as the Stage 2 93oct HWG realtime map. They both do not work. I tried loading it as a realtime map. It still displays my 91 oct map in the current map selection. What's the deal???

 

I do not beleive COBB guys read this forum, but sure, why not try to get their attention here.

 

Hi RageWRX
On the Access Port when you check and see what map you are on it only displays your current base map not your current real time map. If you have any questions send me a pm and we can try and work something out.

Ryan
Fine Line Imports

 

if you read in the instruction manual the ap only displays the base map that you are running (it does not display your real time map). to put the stage 2 map on you need to reconnect the green connectors and hook up your small adapter under the dash. after than select stage two 93 and reflash your ecu. once that is done go in and update the real time map with the map of choice. also be advised after the flash it will take some time to relearn your driving charictaristics (couple hundred miles).....