Drivetrain Encompasses driveline components such as the torque converter, clutch, transmission, shifter, front and center differentials, driveshaft, rear differential, and axles.

Clutch Shudder?

Thread Tools
 
Search this Thread
 
Old Feb 11, 2008 | 10:09 AM
  #1  
BeE_JiZZeLs's Avatar
Thread Starter
Registered User
iTrader: (73)
 
Joined: Apr 2003
Posts: 1,414
From: Suckafree
Car Info: bugeye WAR wagon
Clutch Shudder?

i get (what seems like) a llittle clutch shudder if i don't balance the gas/clutch right at low rpms when i'm taking off from a stop.

wasn't sure which forum category to post in...

will a loose motor mount give the symptoms like clutch shudder? or is it because i now have a solid sti tranny mount it's more rigid?

if u guys have any thoughts please shine in! tia!
Old Feb 11, 2008 | 12:22 PM
  #2  
NickyTee's Avatar
Registered User
 
Joined: Nov 2007
Posts: 158
From: The 209, 916, AND 510. I like to drive.
Car Info: 2003 Subaru wrx
is it an aftermarket clutch?

before i bought my car, the guy had an exedy clutch in it and it would shake like hell if it wasnt perfect....

i made him but in a new clutch. lol
Old Feb 11, 2008 | 02:50 PM
  #3  
BeE_JiZZeLs's Avatar
Thread Starter
Registered User
iTrader: (73)
 
Joined: Apr 2003
Posts: 1,414
From: Suckafree
Car Info: bugeye WAR wagon
yah it's an exedy stage 0. also i have a turbo back untuned... so i don't have any low end back pressure.
Old Mar 11, 2008 | 02:16 PM
  #4  
Bagin,DVS's Avatar
Registered User
 
Joined: Jan 2003
Posts: 555
From: Bethlum, PA
Car Info: silver 2.5 tr 2006MT wrx
does it happen when you first start driving like in the morning? or cold out? i had to have my 02 clutch replaced casue as it would grab it would jerk the car forward as it engaged. it was not smooth at all, but it only happens when the material was cold, so floof ir engage half way heat up and done. no maore chatter till it gets cold again. just kidding that is how i figured out what was going on, but it was a recall on the part and they fixed it, the material would grab to easy on the flywheel, the fix wasa new fly wheel new friction plate and pressuer plate, with bearings.
just to tell you if you get it done at the dealership it will be like 900$, i lucked out, they had to take out the tranny anyways so they knocked three hundred off, cause to get the flywheel they have to drop the tranny. sorry that was for the second clutch, the throwout bearing went bad, the first was warranty.

Last edited by Bagin,DVS; Mar 11, 2008 at 02:17 PM. Reason: bad grammer
Old Mar 11, 2008 | 04:22 PM
  #5  
SuzWRX's Avatar
VIP Member
iTrader: (15)
 
Joined: Oct 2003
Posts: 1,987
From: BAIC
Car Info: 2005 Aspen White Subaru STI
Sounds like it may be your engine mounts. I have the same problem with my ACT 6 puck
Old Apr 3, 2008 | 08:00 PM
  #6  
kYLEMtnCRUZr's Avatar
Registered User
iTrader: (6)
 
Joined: Oct 2006
Posts: 11,892
From: Hangin in Placerville youtube.com/rallydude1515
Car Info: 1999 RS Coupé- 1995 Mazda Miata -KTM 300
mine does this when its cold, the whole dash shakes! like an earthquake!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BLACK02WAGON
Drivetrain
338
Aug 30, 2005 09:01 AM
bailey
Subaru General
14
Feb 27, 2003 08:23 PM
TheRedWRX
Drivetrain
11
Feb 23, 2003 04:14 PM
bailey
New England
1
Feb 22, 2003 02:43 PM
JazWRX
Drivetrain
3
Feb 19, 2003 03:07 PM




All times are GMT -7. The time now is 10:52 PM.