Quick question (out of place I know)
Thread Starter
Registered User
Joined: Nov 2003
Posts: 1,004
From: Northern Bay Area: Larkspur
Car Info: 02 Silver WRX sedan. Eibach springs, Blitz NUR cat back, Rota 17" Attacks, Cobb AccessPort/DP
Quick question (out of place I know)
Hey folks,
I posted this in Trany discussion area but got no responses. I thought it would be a little more pro-active here.
I changed my Trany oil as per instructions on Scubymods. All went well, except my trany dipstick reads really high. Like 3/4 of an inch over the full indicator.
My car is a 02 WRX 5spd. I put no more than 3.8 quarts in it. When I drained it, it seemed as though all the old oil came out.
Is there a trick to reading the tranny oil or should I just drain it out until the oil comes to the full indicator on the stick?
Thanks
I posted this in Trany discussion area but got no responses. I thought it would be a little more pro-active here.
I changed my Trany oil as per instructions on Scubymods. All went well, except my trany dipstick reads really high. Like 3/4 of an inch over the full indicator.
My car is a 02 WRX 5spd. I put no more than 3.8 quarts in it. When I drained it, it seemed as though all the old oil came out.
Is there a trick to reading the tranny oil or should I just drain it out until the oil comes to the full indicator on the stick?
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
brucelee
Bay Area
25
Dec 30, 2010 10:08 AM
72DATS510
Engine/Power - EJ20T (pre-2006 WRX and JDM)
6
Sep 27, 2009 02:34 PM
dlouie87
Interior, Exterior & Lighting
7
Aug 17, 2005 09:35 PM
