question for a friend
04-17-2006, 03:49 PM
#1
VIP Member
Thread Starter
iTrader: (1)
Join Date: Jul 2004
Location: Santa Rosa
Posts: 5,588
Car Info: 2005 Unicorn
question for a friend
here is his situation that he told me:
Well, everything's back together in my car. Yippee!!!
Not so fast Bucko.
Here's the problem.
Car wants to go/move in neutral.
Here's the breakdown.
1. Push clutch in, making sure that the gearshift is in neutral.
2. Start car, letting it warm up some.
3. Let clutch out.
4. Car moves forward like it's stuck in gear.
5. Stacy gets pissed off and wants to rip shifter out and beat car with it.
Anyways, a few points to note.
1. Car won't go into any gears, running or not.
2. Shift forks are not broken.
3. Bearings/synchros are all brand new.
4. Gears are too.
5. Brand new fluid is in the tranny as well.
Not so fast Bucko.
Here's the problem.
Car wants to go/move in neutral.
Here's the breakdown.
1. Push clutch in, making sure that the gearshift is in neutral.
2. Start car, letting it warm up some.
3. Let clutch out.
4. Car moves forward like it's stuck in gear.
5. Stacy gets pissed off and wants to rip shifter out and beat car with it.
Anyways, a few points to note.
1. Car won't go into any gears, running or not.
2. Shift forks are not broken.
3. Bearings/synchros are all brand new.
4. Gears are too.
5. Brand new fluid is in the tranny as well.
04-17-2006, 03:57 PM
#4
the artist formerly known as mcdrama
iTrader: (23)
Join Date: Apr 2004
Location: Santa Cruz Mountains, CA.
Posts: 6,428
Car Info: WRBP 2015 WRX Premium/CVT
did they do the work them selves? It sounds like it. make sure things on the outside are hooked up the same, if they are then its time to take the tranny back apart.
04-17-2006, 09:07 PM
#7
Registered User
iTrader: (3)
Join Date: May 2005
Location: Milpitas
Posts: 847
Car Info: 05 WRX Wagon and 08 Civic Si
sounds like something is connected wrong or installed wrong inside the tranny
if it wont go into gear id be pullin the tranny and taking it back apart something was installed improperly
if it wont go into gear id be pullin the tranny and taking it back apart something was installed improperly
Thread
Thread Starter
Forum
Replies
Last Post
SG5
Bay Area
19
03-14-2008 04:31 PM
IMPerfection
Subaru General
31
06-22-2004 06:56 PM