*Help* Just Installed Defi Stepmaster26B
Thread Starter
Nobody likes the tuna here
iTrader: (51)
Joined: Feb 2010
Posts: 19,779
From: Somewhere San Mateo County, Inside A 911 Ambulance
Car Info: 03 SRP WRX Street Class Prepped, 17 Chevy Duramax
*Help* Just Installed Defi Stepmaster26B
Everything wiring wise is in correctly.
The Gauge illuminates when the headlights are turned on.
It is one of the original Defi Boost Gauges with the First Gen Control Unit
The control unit does not light up
The gauge does not sweep
The gauge needle is at the bottom
The gauge does not react to peak set.
Im guessing the control unit is bad but any other ideas?
The Gauge illuminates when the headlights are turned on.
It is one of the original Defi Boost Gauges with the First Gen Control Unit
The control unit does not light up
The gauge does not sweep
The gauge needle is at the bottom
The gauge does not react to peak set.
Im guessing the control unit is bad but any other ideas?
Mine did that to..try nd play with the wires hooking up to the unit. Took me forever to figure out it was the power harness to the control unit. The wires were pretty much coming off the connector after I figured it out.
I'll try nd find my manual later, see if it mentions anything.
I'll try nd find my manual later, see if it mentions anything.
Thread Starter
Nobody likes the tuna here
iTrader: (51)
Joined: Feb 2010
Posts: 19,779
From: Somewhere San Mateo County, Inside A 911 Ambulance
Car Info: 03 SRP WRX Street Class Prepped, 17 Chevy Duramax
I have the manual ill try again tomorrow but if you can find yours please shoot me a picture? I wonder if its any different from the JDM version.
Aaron suggested the same but I couldn't tell what I could change :/
Aaron suggested the same but I couldn't tell what I could change :/
Last edited by Heedz; Apr 19, 2012 at 11:28 PM.
http://www.defi-shop.com/media/dlink.pdf
theres the manual online...couldnt find mine, think i threw it havent had the gauges for some time.
would double check the wiring though, with mine everything looked okay, but after I pretty much tore it apart ended up being wires coming apart from the connector
theres the manual online...couldnt find mine, think i threw it havent had the gauges for some time.
would double check the wiring though, with mine everything looked okay, but after I pretty much tore it apart ended up being wires coming apart from the connector
Thread Starter
Nobody likes the tuna here
iTrader: (51)
Joined: Feb 2010
Posts: 19,779
From: Somewhere San Mateo County, Inside A 911 Ambulance
Car Info: 03 SRP WRX Street Class Prepped, 17 Chevy Duramax
http://www.defi-shop.com/media/dlink.pdf
theres the manual online...couldnt find mine, think i threw it havent had the gauges for some time.
would double check the wiring though, with mine everything looked okay, but after I pretty much tore it apart ended up being wires coming apart from the connector
theres the manual online...couldnt find mine, think i threw it havent had the gauges for some time.
would double check the wiring though, with mine everything looked okay, but after I pretty much tore it apart ended up being wires coming apart from the connector
the wire harness to the control unit..it looked fine at the connector at first glance, but after I actually inspected it the wires were coming loose from the connector. like the wires were coming apart from the pins.
not sure if all the harness for defi are like this but it was wire>wire shielding>plastic shielding (colored part of the wire) well my wire was actually broken..but the shielding/plastic was fine..
not sure if all the harness for defi are like this but it was wire>wire shielding>plastic shielding (colored part of the wire) well my wire was actually broken..but the shielding/plastic was fine..
Thread Starter
Nobody likes the tuna here
iTrader: (51)
Joined: Feb 2010
Posts: 19,779
From: Somewhere San Mateo County, Inside A 911 Ambulance
Car Info: 03 SRP WRX Street Class Prepped, 17 Chevy Duramax
Hmmm I'll take a look. Also anyone have a control I could try on?
Thread Starter
Nobody likes the tuna here
iTrader: (51)
Joined: Feb 2010
Posts: 19,779
From: Somewhere San Mateo County, Inside A 911 Ambulance
Car Info: 03 SRP WRX Street Class Prepped, 17 Chevy Duramax
12v was not getting a signal thanks to internationalb! It's working. Please close.
Registered User
iTrader: (57)
Joined: Aug 2006
Posts: 7,380
From: the area
Car Info: 04 impreza wrx R.I.P Daniel Wentz JOEBOBBUCKET
Shoot i just saw this, I could of told you that!! i had the same issue when i removed my cluster and one of the defi wires got pulled of a little bit but it wasnt that noticeable until i fulled my whole setup apart and found out that one pin was barely loose and caused the gauges not to work...
Thread
Thread Starter
Forum
Replies
Last Post
jamestaWRX
Hawaii Classifieds
9
Aug 20, 2006 10:24 PM
silentshadow
Stereo & Security
1
Nov 14, 2005 11:57 AM
jsavage
Drivetrain
1
Aug 10, 2003 05:18 PM
timl
Engine Management
0
May 25, 2003 08:33 PM
Zoeb2s
Stereo & Security
5
Feb 27, 2003 08:11 PM
