I Just Installed the TXS Dual Stage Boost Controller in my WRX Wagon. I Also Have an Auto Meter Cobalt Series Boost Guage. On the DS Boost Controller There are 2 Nipples a Blue and A Brass. The Brass nipple Ties in to the Turbo and The Blue Ties in to the Wastegate. What line do I tie in the Boost Guage to. In Line with the Turbo or the Wastegate. As of now, The Boost Guage does not go above 8 PSI in both stages! Also I have capped off the factory solenoid Line. Is this all I need to do?
The Last thing is I Tied the purple wire (Power) in with the Head lamps (in the car under the steering wheel console). When i switch the boost controller into the stage 2 My Lights Interior Get Very Bright ( Boost Guage, Dash Lights) and my Exterior Dim Excessivly (Head Lamps, Fogs). I have replaced the factory battery with a Deep Cycle Yellow top. Why is this Happening?