We are ready for 2007 !


Unsure of a price quote ?

Then go get the best quote out there and call us last and we will beat that qoute..... We also work on all vehicles and perform all scheduled maintenance.

I know the vendor/shops try to under cut us but "we will beat their quotes" period!

Thank you again



we will PM you back !

www.gbmotorsports.net


"We are fully insured"


gbmotorsports inc.

21666 Cloud Way unit 6

Hayward, CA 94545


"a set up for any budget"


SHOP HOURS !!!!

Our store/shop hours are from 10am thru 6pm Tuesday to Saturday, closed on Sunday and Monday.

how much for a clutch install on a wrx?

how much for a clutch install on a wrx?


PM'd

:)

gino

how much for:
-sti engine mounts install?
-sti tranny and engine mounts install?
-rear diff bushing install?
-steering rack bush install?
thankss

how much for:
-sti engine mounts install?
-sti tranny and engine mounts install?
-rear diff bushing install?
-steering rack bush install?
thankss

I need to know what kind of rear bushing you have? We can do a package install price as soon as I know what rear diff busing type it is.

:)

gino

hah nvm i installed the above except for the steering rack bushings, how much for installing the whiteline steering rack bushings?thanks

pm'd you.

:)

Well as you all know, weekends are always jam packed with cool installs. To better serve and accomodate our customers, we decided to do weekday labor discounts. You can do an earlybird vehicle drop off or before closing vehicle drop off.

Call us to avail of the weekday special labor discounts and schedule a weekday of your choice.

Thank you again

gino and soren

Tuesdays are usually light days ;), except for Soren :D

how much to take out my tranny, swap in ra gears and reinstall it? thanks

all depends on what's on the RA set you have? is it the same as what we get ? is the set complete with shifter rod etc.?

it is in the $000 plus range to R&R and that includes RA gears installed using all your old parts too (syncros etc). with warranty 30 days on the labor and RA gears installation.

let me know if someone else is cheaper, I will beat any price period.

:)

gino

or I can put together an RA for you coz I have a spare tranny here at the shop and all I need is the RA gears ahead of time to build it and thus you have a quicker turn around (same day) ;).. Your tranny is not blown is it?

could you pm me a good quote for installing just 2 front goodridge stainless steel brake lines only? did the rears, and have fluid available if needed to refill. thanks you guys!

Justin

Price for spring install for 05 Saab 92x (04/05 WRX)

-Eibach Prokit

-ProDrive springs

with alignment - Total

thx

seUol, you have PM. :)

Avantt, you have PM as well. :)

gino

how much for labor to swap a stock td04 to another stock td04?

Thanks

slammedV6,

You got PM.

:)

gino

how much for gauge install ( egt, boost, air fuel) all autometer sport comp. thanks.

how much for up/ down pipe install? $100 is the cheapest I've found. How long?

tommysyko

you got PM

:)

gino

1. guage install of egt sport comp into autometer guage bezel along with boost guage i installed already but not in the bezel.

2. price of 30k and 60k services. I bought the car at 33k and now it has 48k, i'm not sure which one i should go with since i don't know what has/hasn't been done.

1. guage install of egt sport comp into autometer guage bezel along with boost guage i installed already but not in the bezel.

2. price of 30k and 60k services. I bought the car at 33k and now it has 48k, i'm not sure which one i should go with since i don't know what has/hasn't been done.


on the service qoute, bring the car in so we can check it.

on the EGT Autometer brand, is it going to be a A pillar mount, steering wheel center pod mount or cluster gauge mount or center dash pod? .

Please PM me back

thank you :)

gino

its the cluster guage mount i believe, where the guages are on the bottom sides of the speedometer/etc guages.

how much for a gc8 to wrx engine wiring... just all the wiring involved ...i provide all the harnesses all you have to do is wire it up.. ive been quoted 750

gino, i'm gonna need the 60k service done soon. might as well check now...hit me up with a price. thanks...

let me know if I missed anyone.

:)

gino

gutted stock uppipe installation? i don't have the gaskets. Approximately how long would it take?

sjscooby


you got PM.

:)

gino

Call us on any parts and labor special deals.

:)

how much for up/ down pipe install? $100 is the cheapest I've found. How long?

I am interested in your price for an uppipe install on my 2004 WRX. I have a Bosal uppipe I've been wanted to get installed. I know Gruppe-S charges $150. I have just started getting labor rates.

What are you business hours? How long does the install take? I work/live in San Jose. Is this something I can wait for?

Thanks!

PM'd you Gino regarding a Honda motor.

How much for installing the vf34 package and helix up/dp.. total

hey Gino, how much would it run me to get an RA gearset from you installed with syncros and all, like a full rebuild OTD? thanks

You have email. :)

domo, eljefe, wrxguy, dln84

You all have PM.

:)

gino

domo, eljefe, wrxguy, dln84. You all have PM. :) gino

I do? Can you resend? I think my screen name might have been mispelled on PM...Thanks!

how much for front brake pads install?

-Ave

domo, ave.... you both have PM..

:)

gino

how much for just eibach prokit on 04 wrx. would alignment be included? thanks

1newrx

you got PM

:)

Still waiting on the clutch quote...;)

Still waiting on the clutch quote...;)



ooops, I completely forgot. Hang in there.

;)

gino

:confused: :D

ooops, I completely forgot. Hang in there.

;)

gino

someone ones gonna get a scolding at the shop.. lol....

Okay let me make it a better deal. Get a qoute out there and all I have to do is beat that qoute. Then I will call myself to get parts pricing.

let me know

gino

You've got email... :)someone ones gonna get a scolding at the shop.. lol....

Okay let me make it a better deal. Get a qoute out there and all I have to do is beat that qoute. Then I will call myself to get parts pricing.

let me know

gino

got it and replied

:D

Replied back... :)

We need to set up a time.

got it and replied

:D

Replied back... :)

We need to set up a time.


you got mail !
:)

gino

how much would it be for an uppipe installed on weekdays? Thanks.

SG5 you got PM.

:)

gino

yea i'd like to know the same thing. how much for an uppipe installed on weekdays?

yea i'd like to know the same thing. how much for an uppipe installed on weekdays?


shadowxboi you gat PM

:)

gino

How much is the labor to change the spark plugs on a 04 wrx (I have the plugs already?
I bought the borla hush exhaust from MPJ 6 months ago and I want to get the 3 inch. adaptor. How much is the total with the labor on spark plugs and the adaptor installed?

Thanks,
Jeff

How much is the labor to change the spark plugs on a 04 wrx (I have the plugs already?
I bought the borla hush exhaust from MPJ 6 months ago and I want to get the 3 inch. adaptor. How much is the total with the labor on spark plugs and the adaptor installed?

Thanks,
Jeff

you got PM...

:)

gino

How much to install some SS brake lines on my WRX? I've got the lines and brake fluid, so I just need the labor for the install and brake bleed.

Thanks.

Steve

replied to the email, :)

gino, you have PM.

I need some maintenance done on my 2002 wrx wagon:
-Replace spark plugs
-Replace fuel filter
-Install Boost and EGT gauges

I already have the OEM spark plugs, OEM fuel filter and Omori gauges and bezel, can you break down the cost/time for those items?
Thanks, Matt

doughboy ............you got pm back :D


Matt..... you PM as well.

:)

gino

Howdy.

How much to install:

Gruppe S Header
Perrin Turbo Inlet Hose

on an 05 STI?

mrhu, you have PM.

:)

gino

dont forget we will beat all their quotes, PERIOD.;)

this week is a little slow, anything in mind (parts and or labor) will definitely get a good deal.

:)

gino/soren

I need my rotors turned, new fluid and new pads. How does Friday after 2:00pm look for you guys?

I need my rotors turned, new fluid and new pads. How does Friday after 2:00pm look for you guys?

PM'd you.

:)


gino

just pm'd you about some maintenance. :)

replied and thanks again.

:)

gino

i got a borla hush and i would like to get the 3'' adaptor . . . how much would this cost ?

scobyroo....did soren contact you yet?

Slow week ! Hit me up for installs. We are in a good mood.

:D

gino

Gino,

got an appt. with you this Sat 2pm for gauge install. One of the gauges is the EGT gauge. Besides the gasket i have to bring, what other things do I need? Do you have the bund and welding capability there?

Thanks.

Henry

Hey Gino,

how much is it to install a VF34, pink injectors, fuel pump, and a perrin turbo inlet hose?

Gino,

got an appt. with you this Sat 2pm for gauge install. One of the gauges is the EGT gauge. Besides the gasket i have to bring, what other things do I need? Do you have the bund and welding capability there?

Thanks.

Henry


henry

We have welding etc. If you do not have after market headers, then we do not need the EGT bung, we drill and tap. If you do have an after market header, we make the bung with the machine lathe and weld it properly.

see you saturday

gino

Hey Gino,

how much is it to install a VF34, pink injectors, fuel pump, and a perrin turbo inlet hose?


Okay, I do not want to loose the install and need the revenue, so please get me a quote and I will beat that to make sure you get the best pricing. PM me with it. No worries.

Thank you

gino

henry

We have welding etc. If you do not have after market headers, then we do not need the EGT bung, we drill and tap. If you do have an after market header, we make the bung with the machine lathe and weld it properly.

see you saturday

gino

Oh, got it. Thank you. so besides the gaskets, pod, gauges, small amount of money :) I'm not bringing anything else with me...

See ya

Oh, got it. Thank you. so besides the gaskets, pod, gauges, small amount of money :) I'm not bringing anything else with me...

See ya

henry

dont forget the car :D..


see you saturday

:)

gino

Forgot one thing - left you a v.m. on if you guys have any rear strut tower bar in stock.

Let me know if you dont' mind. Thanks.

no worries, I think we have it in stock but will check with Soren or Philip to see if we have any here at the shop that is not sold..

Cool Gino, pending on price/make of the rear bar, mark down one for me please.

Talked to you today on moving the install to next Sat. Remember that you said you are likely about to do the install on weekday nights. What is the earliest you can start on weekday nights? I can swing by during the week after work.

Call me.

Thanks

Henry

Cool Gino, pending on price/make of the rear bar, mark down one for me please.

Talked to you today on moving the install to next Sat. Remember that you said you are likely about to do the install on weekday nights. What is the earliest you can start on weekday nights? I can swing by during the week after work.

Call me.

Thanks

Henry

Henry

Let me check with Soren or Phil on the parts you need or better yet email them at sales@mpjperformance.com so you can be assured of the availability.

The install on weeknights will have to be after Wednesday due to 2 cars I still have to complete that was scheduled. PM me on Wednesday.

:)

gino

Henry

Let me check with Soren or Phil on the parts you need or better yet email them at sales@mpjperformance.com so you can be assured of the availability.

The install on weeknights will have to be after Wednesday due to 2 cars I still have to complete that was scheduled. PM me on Wednesday.

:)

gino

Thanks Gino, no problem. Would Thur night work for you?

BTW, UPS should be dropping off 2 boxes at your place at Cloud Way today or tomorrow. It is under my name.

Thank you once again.

PM'd you

:)

gino

How much for a helix catted downpipe and helix uppipe with installation for an 05 WRX?

I PM'd MPJ for a package pricing.

;)

let me know

gino

How much to get all the needs and labor from you guys to repair my tranny?

and

How much is it to get a New /and Used Tranny from you guys with /and without labor?

thx, I need to compair prices


*03 wrx. (aftermarket or OEM is fine. I need to find an affordable one.)

How much to get all the needs and labor from you guys to repair my tranny?

and

How much is it to get a New /and Used Tranny from you guys with /and without labor?

thx, I need to compair prices


*03 wrx. (aftermarket or OEM is fine. I need to find an affordable one.)


We cannot estimate the repairs on your tranny until it is openned. We do not have any new trannies but my understanding is that you need a tranny.


We dont have a used working tranny, I only have one that is missing 2nd gear and it is not yet repaired or openned.

We can repair the one we have here and may take a week or so to rebuild one just incase we need to order parts and sell it to you if that is what you need, but we will need your old one for core intact and not openned or disassembled so I can get that repaired as well for future use.

Note that these rebuilt ones doesnt come with all new insides, just the parts that need replacing will be new and it may go over the $700 estimated selling price due to parts etc. and it may not go over as well.

As far as excact pricing on these units it would not be less than $700 with (unopenned tranny) core exchange and you get 30days limited warranty on the rebuilt tranny and again not all parts inside is new.

Labor is $400 for R&R on the tranny itself. I hope that helps you out, let me know.

:)

gino

any questions? Just PM or email me.

:)

gino

already PMed, but are you guys goina be open Sat the 31st?
I need some bushing pressed out/in.

Been calling the last 2 days but no answer :(

already PMed, but are you guys goina be open Sat the 31st?
I need some bushing pressed out/in.

Been calling the last 2 days but no answer :(


yeah Ozzo had the flu bug and Mark is on vacation (Riggs gets nervous when the phine rings so he wont answer.lol.)



Let me know what you want to do, drop it of or just the arms. Nice seeing you again.

:)

gino

hey gino, do you have that adapter ready to do my bushings? if so i'll be coming over soon, still looking for a guy willing to give me a ride.. Riggs is still not answering the phone, lol.

hey gino, do you have that adapter ready to do my bushings? if so i'll be coming over soon, still looking for a guy willing to give me a ride.. Riggs is still not answering the phone, lol.


Can you drop the a arms so I can at least measure ? :) I cant make them till I have the a arms.

let me know

:)
Gino

can you do it the day of when I bring the A arms? probably next tues or wed.. i'll give u a call.

can you do it the day of when I bring the A arms? probably next tues or wed.. i'll give u a call.


I can surely try to get it done if no snags. Drop it off..

:)

gino

hey gino,
missed u on tuesday, ozzo got me to come in thursday morning.. i'm goina have my car on stands and control arms off wednesday night on my driveway to bring the arms to you first thing thursday so dont forget about me bro.
see you then, late

hey gino,
missed u on tuesday, ozzo got me to come in thursday morning.. i'm goina have my car on stands and control arms off wednesday night on my driveway to bring the arms to you first thing thursday so dont forget about me bro.
see you then, late


I wont forget, we stayed late last night and ozzo told me about the a arms being in on thursday and saw your name on the board ;)....

I got the week off so I will there.

:)

gino

firebert,

I hope all worked out with you with those new bushings.

thank you for choosing us again

:)

gino

Please quote me for the following to be installed (I will supply) on my '01 RS coupe. I can get my own alignment if needed.

Struts - AGX
Springs - Prodrive P1
Anti-Lift Kit - Whiteline
Stainless Steel Braided Brake Lines (Goodridge)
Also flush/bleed brake system (completely replace fluid)

You guys have worked on 2 other Subarus of mine in the past and always done a great job.

Please quote me for the following to be installed (I will supply) on my '01 RS coupe. I can get my own alignment if needed.

Struts - AGX
Springs - Prodrive P1
Anti-Lift Kit - Whiteline
Stainless Steel Braided Brake Lines (Goodridge)
Also flush/bleed brake system (completely replace fluid)

You guys have worked on 2 other Subarus of mine in the past and always done a great job.


PM'd you !

:)

gino

I have a leaking uppipe that I would like to have reinstalled. How much would this be?

I have a leaking uppipe that I would like to have reinstalled. How much would this be?


PM'd ya !

:)

gino

can you beat a $5 catch can install?? :p

firebert,

I hope all worked out with you with those new bushings.

thank you for choosing us again

:)

gino

Everything was perfect Gino. I would recommend you guys to anyone.. oh yeah, do you guys sell whiteline parts out of GB now? I have a buddy who might be looking for a swaybar.

Sent you guys a PM.

Thanks!
Karl

can you beat a $5 catch can install?? :p

zoeb

ya bored again .lol.

:)

Sent you guys a PM.

Thanks!
Karl


pm'd ya back.

:)

gino

How much for up and down pipe install??

Mark

How much for up and down pipe install??

Mark

PM'd you !

:)

gino

Hey Gino,

Long time no see! How much for sway bar installs? Are you guys open this saturday?

oh btw, do you guys still sell parts? if so, need quote on:

1) Whiteline 24mm Adj. Front Swaybar
2) Whiteline 24mm Adj. Rear Swaybar
3) Whiteline Front Strut Bar
4) Whiteline Rear Strut Bar
5) Whiteline heavy duty rear endlinks


-David
I have a 2006 STI

Hey Gino,

Long time no see! How much for sway bar installs? Are you guys open this saturday?

oh btw, do you guys still sell parts? if so, need quote on:

1) Whiteline 24mm Adj. Front Swaybar
2) Whiteline 24mm Adj. Rear Swaybar
3) Whiteline Front Strut Bar
4) Whiteline Rear Strut Bar
5) Whiteline heavy duty rear endlinks


-David
I have a 2006 STI

pm'd you

:)

gino

I almost have all the parts ready...what is your weekday special for this stuff:

replace front rotors and pads
replace rear rotors and pads
replace/flush brake fluid
install kybgr2 struts
install prodrive springs

Matt
02 wrx wagon

I almost have all the parts ready...what is your weekday special for this stuff:

replace front rotors and pads
replace rear rotors and pads
replace/flush brake fluid
install kybgr2 struts
install prodrive springs

Matt
02 wrx wagon
\
PM'd you

:)

Hella supertones install :o



edit: id like to install them asap if you guys can do the install

Hella supertones install :o



edit: id like to install them asap if you guys can do the install

PM'd ya

:)

BUMP! Thanks to Riggs, Ozzo, and Gino... now my car doesn't sound like crap!

Salamat!
Karl

BUMP! Thanks to Riggs, Ozzo, and Gino... now my car doesn't sound like crap!

Salamat!
Karl

thank you for choosing/staying with us with your automotive needs... anytime you need us we are here.

:)

ayos lang

gino

next week has open slots ! call or PM/email us for your service/install needs.

PM'd and emailed you.

PM'd and emailed you.


PM'd back

:)

gino

Pm us ahead to get the best quotes PERIOD.

Do not forget to mention the total package they qouted you.

:)

gino

PM box now has room..

:)

open spots for nextweek ! call in LVM or PM us.

:)

Pm us on quotes.

:)

How about underbody H brace install for 04 STi?

William

How about underbody H brace install for 04 STi?

William


PM'd you, we can do that.

;)

gino

Could you give me a quote on a jdm pink springs and steering rack bushings install. Thanks.

Ryan

Could you give me a quote on a jdm pink springs and steering rack bushings install. Thanks.

Ryan


PM sent

:)

gino

Okay folks, pm us on with their best quotes and we will beat them within reason to get the revenue.

:)

we are not limited to Subies only ;)... Get the best quotes out there and we will get you a better deal on all repairs period.

:)

Could I get a price on Defi 60mm (Imperial) Black Face Gauges, Green Backlit with controller (Boost, EGT and Oil Pressure meters)+ installation? You can PM if you want.

Thanks,

Supremo

Simple question, how much for catback install?

Ed

Simple question, how much for catback install?

Ed

PM'd you

:)

labor cost for 4EAT -> 5MT swap? MGIA

how muchy for spring install on wrx wagon? :D

labor cost for 4EAT -> 5MT swap? MGIA

PM'd you

:)

gino

how muchy for spring install on wrx wagon? :D

PM'd you as well.

:)

gino

Hey Gino, would you have time this Sat night or Sunday to check out my suspension? I am getting noise and vibration.

come saturday morning around 11am

:)

gino

come saturday morning around 11am

:)

gino

Hi Gino, just talked to you over the phone. I will call you again to set something up for next weekend or something.

Thanks,

Henry

Sent PM.

Sent PM.


PM'd back :D

Gino, seeing you tonight...

Henry

can i also get a price quote on springs install? Thanks!

can i also get a price quote on springs install? Thanks!


PM'd you

:)

gino

Price for install of Subaru boost gauge? Price for Defi boost/egt install and just boost by itself?

can you guys PM me the price for a 4EAT->5MT tranny swap? The cheapest Ive found is $1k (+extra parts) from FLI

Just wanted to say, I have brought my last 3 Imprezas to GB over the years and have always been treated right. Thanks for all the help guys!

Just wanted to say, I have brought my last 3 Imprezas to GB over the years and have always been treated right. Thanks for all the help guys!


what an early christmas gift.

we love you all. Stay tuned coz we are working on getting the shop set up for more parts and services both online and local consumption.

:)

gb crew

what an early christmas gift.

we love you all. Stay tuned coz we are working on getting the shop set up for more parts and services both online and local consumption.

:)

gb crew


oooooooooooo...i am thinkin i need a bigger gb logo on my car perhaps a nice window banner hahaha

I am having stickers made and more T shirts as well.

Hi! I need a quote for 60k service on a bone stock 2000 2.5RS.

Hi! I need a quote for 60k service on a bone stock 2000 2.5RS.


no problemo, get the best qoute and I will hook you up. I want to have the last bid and that way we get the job/revenu for sure and it also gives you the best deal out there period.

:) PM me

gino

can i also get a price quote on springs install? Thanks!
i would also want a quote for springs install

i would also want a quote for springs install


PM sent

:)

Hi,

I'm looking for a price quote on install of rear brakes and rotors for an 05 STi.
Thanks

Hi,

I'm looking for a price quote on install of rear brakes and rotors for an 05 STi.
Thanks


PM'd you

:)

gino

can you give me a price quote for front and rear swaybar install on a 04 wrx wagon . :) thanks

can you give me a price quote for front and rear swaybar install on a 04 wrx wagon . :) thanks


PM'd you

:)

gino

Hello Gino, just PM'd you....

checking it now

:)

gino

So Gino, will be seeing you at 930am at your shop tomorrow morning..

Have a good night :)

Gino, just sent ya a PM! TIA!

you guys out of town? pm sent. thanks!

hey gino, pm sent regarding mechanical boost gauge install....

hey gino, pm sent regarding mechanical boost gauge install....

reading PM. :)

pm'ed you for a TBE swap and just a catback install.

-Mark C.

pm'ed you for a TBE swap and just a catback install.

-Mark C.


PM'd you back.....
:)

gino

Pm'd you on rear swaybar install for this sat, thanks!

pm'd you back

:)

PM'd about swaybar install!

PM'd about exhaust/H brace install

PM sent back....

:)

Pm'd a few days back about TBE and Boost Guage for next week in the evening, hopefully Tues or Thurs. Let me know, thanks

Pm'd a few days back about TBE and Boost Guage for next week in the evening, hopefully Tues or Thurs. Let me know, thanks


bro

PM'd back.

:)

gino

bro

PM'd back.

:)

gino

PM'd you one more time, thanks!

got it and you are set.

:)

gino

Ask us if you are not sure.

:)

Hello Gino,

PM'd you

Henry

got it and PM'd ya back.

Hey Gino,

PM'ed you.

Hey Gino,

PM'ed you.

PM'd back

:D

You got PM Gino !

and you got one as well

:)

price quote on spring install on 05 rs.

You got PM, Gino. :) If possible, let me know how much too, pls.

Okay

Just want to say Gino/Riggs again took care of my WRX and they kick ass as always.

Hey Gino,

Need a quote to install TBE on a STi. And do you have time this Thursday?

Thanks.

Will

Will
You got PM.

:)


gino

got a 335, i need an oil change and my downpipes re-adjusted. Got time this week?

got a 335, i need an oil change and my downpipes re-adjusted. Got time this week?

Bring the parts and I see you on Friday at 10am.

:)

gino

Need labor quote to install front lateral link bushings (4 bushings). Lateral links are already off the car.

Need labor quote to install front lateral link bushings (4 bushings). Lateral links are already off the car.


Drop by one saturday and I can work it out with you, no worries. I have 2 hydrolic presses at the shop.

:)

gino

How much would it be to install

-prodrive springs
-KYB gr-2 struts

I already have the parts!
thanks!

PM sent for 60K mi quote.

PM sent for 60K mi quote.

PM'd you back

:)

How much would it be to install

-prodrive springs
-KYB gr-2 struts

I already have the parts!
thanks!

You got PM!!!!

:)

gino

PM'ed

PM'ed

PM's???????? Yeah Hubert told yesterday.....

I read em all !

See you soon.

:D

okay, summer weather just hit today so let me know if anyone needs coolant flushing.

we will beat all prices. :)

gino