Fine Line Imports is proud to release the FLI two piece rotor upgrade kit for the 2004-2009 STI. This rotor kit has been perfected with many hours of hard work. In conjunction with WR racing we have designed and tested a heavy duty two piece rotor that can not only withstand your track day abuse but also your daily driving. This high quality 72 vane slotted Brembo race rotor is matted to a CNC machined light weight hat made from 7075-T6511 aluminum. Each rotor is a little more then 5lbs less then a stock rotor and total rotor diameter has increased by 3mm (1.5 on each side). The thickness has remained the same which allows them to be used with the factory Brembo caliper.

The only complicated part of using these rotors is that a modification needs to be made to the existing or new pads that are going to be used. On the set below we had the pads slightly cut on a waterjet in order to make enough clearance from the out side diameter of the pad in relation to the outside diameter of the rotor hat. FLI will offer any Ferodo, Hawk, OEM Brembo and Pagid pads with the kit and if you want to use a certain brake pad that we do not offer, then send them in and FLI will have them cut for fitment.

Overall I am very happy with the way these have turned out. After performing the correct heat cycling bedding process, verification was made that there was is no clearance issues. Fitment is A+ and they are drilled for both 5x100 and 5x114.3 so one rotor works for everyone with a STI or Brembo brake take offs.


Rotor Highlights
1.High quality 72 vane Brembo race rotor. (Used on open wheeled race cars)
2.7075 light weight and strong rotor hats for both 5x100 and 5x114.3
3.Weight reduction of a little over 5lb per corner.
4.Two piece design saves money when reordering rotors.


FLI is excited to offer this very high quality brake rotor/pad upgrade kit to the Subaru community for any STI car. If you have any questions please let me know.

http://i15.photobucket.com/albums/a388/FLIWRX/WRrotors1.jpg?t=1245103408



http://i15.photobucket.com/albums/a388/FLIWRX/WRrotors4.jpg?t=1245103442



http://i15.photobucket.com/albums/a388/FLIWRX/WRrotors3.jpg?t=1245103489



http://i15.photobucket.com/albums/a388/FLIWRX/RyansWRbrakes020.jpg?t=1245103583



http://i15.photobucket.com/albums/a388/FLIWRX/RyansWRbrakes023.jpg?t=1245103637

As I said above pricing for the rotors will be 750.00 Our first production run is commencing now. If you would like to pre order a set and be one of the first to get them please let me know. If ordering pads as well let me know and I will work out a very good deal on set of pads. I choose to run the Pagid street pads with mine and am very happy with them.

For more info check out our blog at http://fliblog.wordpress.com/2009/09/04/flis-sti-stage-2-5-brake-upgrade/

holy crap they look great!

holy crap they look great!



Thank you I am hoping they catch on they are working good for me so far.



Ryan
Fine Line Imports

never mind i read hahha

The specs, are they:

standard

strict

super dee duper strict

????

What's the ETA for these, as I must have them!!!

i heard extra super dee duper strict

The specs, are they:

standard

strict

super dee duper strict

????

What's the ETA for these, as I must have them!!!



These would be extra super dee duper strict with a touch of redonculusly strict. ETA on the first 50 sets will be about 30 days. So how many sets can I put you down for.

Ryan

i heard extra super dee duper strict



you have heard right sir. everyone knows my specs are strict.

wish the brembos come with it too =D

Ryan those are like sex to my eyes. Very tempting...

WOW!! me want!!

WOW!! me want!!



They can be yours I am going to start a group by and try and offer deals to the first people that would like to get in on these rotors.


Ryan

BTW...how much are the replacement rotor pieces?

BTW...how much are the replacement rotor pieces?

Replacement run around 200.00 each if you need new ones.

those look fantastic

Do want. :faint2:

Do want. :faint2:



Hehe I told you would you like them.


Ryan

Hehe I told you would you like them.


Ryan

Yes, yes, you were right. :P

Seriously, if people have the money for this upgrade, they should be pre-ordering ASAP! Pads + rotors is the way to go, especially if you can throw in some fluid and SS brake lines. It's definitely on my list.

Yes, yes, you were right. :P

Seriously, if people have the money for this upgrade, they should be pre-ordering ASAP! Pads + rotors is the way to go, especially if you can throw in some fluid and SS brake lines. It's definitely on my list.



And at 750.00 for the rotors I think that's a great deal for the quality. I will put together a great package for anyone ordering pads or pads and lines.


Ryan

These look very nice!

Any plans to do stoptech 328x28 replacements?

These look very nice!

Any plans to do stoptech 328x28 replacements?

Depending on the success of these we might. Next up on a list is a set for the rear.

Ryan

Will these rotors work on the 04 WRX wagon?

Will these rotors work on the 04 WRX wagon?

These are only for the Brembo I am sorry.


Ryan
Fine Line Imports

Depending on the success of these we might. Next up on a list is a set for the rear.

Ryan


Yes please!

Yes please!
Thats after these fronts take off. Soooo how many sets can i put you down for lol.


Ryan
Fine Line Imports



PS Im putting together a group by on the first sets of them for anyone interested PM me.


Ryan

Depending on the success of these we might. Next up on a list is a set for the rear.

Ryan

Yes please!

+1
I'd love to see a baller set of rear rotors like these for the rear, that shed some weight off the stock rotors, and still keep the e-brake.

Hey Ryan, have you started a group thing yet? i'm very interested on a set for my 04 STi, i might also know 3 other people who might follow my lead for a good price. PM me.