View Full Version : APS powered 2006 STI


FLIWRX
10-30-2007, 04:53 PM
This is a customer’s daily driven 2006 Subaru STI. On 95 Octane this car makes 377 hp and 379 tq. to the wheels with 23.5 psi tapering to 19.5 psi (SAE is off, temp in room is 68 degrees with 50% humidity). On 91 Octane this car makes 337 hp at 6750 rpm and 347 tq. at 4750 rpm with boost peaking at 21 psi tapering to 19 psi (SAE is off, temp in room is 75 degrees with 45% humidity). These are on our in house Mustang AWD Dyno.

Power Mods List:
Stock STI engine and heads
Cobb V2 AP with Zeitronix 3.5 bar map sensor
APS SR56 turbo
APS 725 FMIC
APS 70mm CAI
APS EQ Header/Up pipe
APS 3.5 TBE
PE 850cc injectors
Walbro 255ml ph fuel pump
Prodrive 3 Port boost solenoid
Cobb crank pulley
Carbon Fiber Drive Shaft

http://i15.photobucket.com/albums/a388/FLIWRX/06STI95Octvs91Oct.jpg


To give you some reference on readings from our dyno, a stock 06 STI reads 259 hp and 258 tq. to the wheels with SAE off, temp in room 75 degrees with 45% humidity.


http://i15.photobucket.com/albums/a388/FLIWRX/Mikes95OvsStock06STI.jpg



Miles

Fine Line Imports
www.finelineimports.net

FLIWRX
05-13-2008, 03:50 PM
Here are some pictures of said car. If you have any questions please let me know.


http://i15.photobucket.com/albums/a388/FLIWRX/RACINGMIX1680x1050.jpg



http://i15.photobucket.com/albums/a388/FLIWRX/enginebay-1.jpg



http://i15.photobucket.com/albums/a388/FLIWRX/fobdriver.jpg