Suspension, Handling, and Brakes Talk about Struts/springs, coilovers, anti-swaybars, strut bars, steering, Pads, fluid, lines, rotors, calipers, boosters, and anything that is brake and suspension related.

what grease on swaybar bushings?

Old Dec 2, 2005 | 08:25 AM
  #16  
slvrsubywgn's Avatar
VIP Member
iTrader: (7)
 
Joined: Jan 2005
Posts: 2,168
From: EBAIC- Wondering if I should have taken the blue pill...
Car Info: 03 WRX wagon type RA
+1 for teflon tape and grease. I upgraded my 17mm rear sway bar on my wagon to a 20mm with stock bushings and only used teflon tape and it still squeaks when I hit bumps. I will be adding grease soon.
Old Dec 3, 2005 | 08:20 AM
  #17  
Kay95's Avatar
Registered User
 
Joined: Feb 2003
Posts: 527
From: Glen Rock, PA
Car Info: 95 Impreza coup, green, 5speed 1.8l awd
Sounds like any type of grease works.
Old Dec 12, 2005 | 06:49 AM
  #18  
sadsack's Avatar
Registered User
 
Joined: Jul 2005
Posts: 5
It mostly comes down to convenience - how often do you want to crawl under the car to regrease your bushings? I'd rather put in a good grease once every 2-3 years than an inappropriate grease every 3-6 months.

Lithium complex greases are not waterproof, so they will eventually wash out. In addition, lithium greases are not very reversible, in that once the base oil separates out from the thickeners/solids, it cannot recombine. Reversibility is important if the grease is subject to mechanical shocks or temperature extremes.

Aluminum complex and polyurea greases are the most resistant to water washout, and the former is 100% reversible. Aluminium complex greases are also compatible with lithium greases (this means you can be lazy and just add additional grease instead of completely removing the old grease). Polyurea greases are incompatible with any other type of grease.

Most lawn or farm equipment shops sell aluminum complex greases, FWIW.
Old Dec 12, 2005 | 06:33 PM
  #19  
andyf's Avatar
VIP Member
iTrader: (3)
 
Joined: Nov 2003
Posts: 410
From: San Francisco, CA
Car Info: 2012 Mazda 3 Hatch
The main issue I'm concerned with is if the grease is compatible with rubber, as the wrong grease will dissolve the rubber bushings. I have tried 3 types of grease so far and I still don't have a conclusive info if Mag 1 Marine Grease is safe for my rubber bushings. =/
Old Dec 20, 2005 | 05:05 PM
  #20  
andyf's Avatar
VIP Member
iTrader: (3)
 
Joined: Nov 2003
Posts: 410
From: San Francisco, CA
Car Info: 2012 Mazda 3 Hatch
Okay, I finally found a specific lube that is definitely rubber safe and good for use in the sway bushings... Sil-Glyde. I got a tube of it at Napa Auto, and it specifically says, "harmless to rubber" on the tubing.
Old Dec 21, 2005 | 12:47 PM
  #21  
subie OCD's Avatar
Registered User
iTrader: (11)
 
Joined: Aug 2005
Posts: 5,808
From: Concord
Car Info: 04 STi
Ive had the best results with LOTS of teflon tape (wrap it up like a mummy) and a bit of grease that came with my whiteline endlinks. Using just grease left them squeaky after a few days. No squeaks yet with the teflon tape
Old Dec 23, 2005 | 03:49 PM
  #22  
DaFastOne's Avatar
Registered User
iTrader: (17)
 
Joined: Dec 2002
Posts: 359
From: Bay Area
Car Info: 08 evo x
Prothane or the energy suspension version of the stuff. Best stuff, its also the stuff COBB gives you for your sway bars.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Krinkov
Bay Area
56
Apr 27, 2005 09:17 AM
2000RS
Suby Shopping & Maintenance/Warranty
3
Apr 27, 2004 08:53 AM
chubb
Drivetrain
1
Apr 27, 2004 05:47 AM
SHADO
Engine/Power - non turbo (All non turbo Imprezas)
1
Feb 9, 2004 07:35 AM
Imprezer
Drivetrain
6
Jun 12, 2003 09:22 PM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 09:48 AM.