Speed Bleeders
Thread Starter
Registered User
iTrader: (2)
Joined: Nov 2002
Posts: 1,644
From: Lawrence, Kansas
Car Info: 19' Impreza Sport Manual / 99 Miata / 13' OB
Speed Bleeders
I'm not sure how I lived so long w/o getting these but if you flush your own brakes they are a very good idea IMHO. Did a quick page:
http://www.scoobymods.com/forums/sho...&threadid=3104
http://www.scoobymods.com/forums/sho...&threadid=3104
VIP Member
iTrader: (9)
Joined: Nov 2002
Posts: 3,928
From: ...a craphole in No.County San Diego
Car Info: MMVI AW WRX STI
Ditto'ed 10x over.
With that vacuum pump that you have in your installs, along with the speed bleeders, I can bleed without even taking the wheels off, in about 5 minutes. Very, very awesome.
With that vacuum pump that you have in your installs, along with the speed bleeders, I can bleed without even taking the wheels off, in about 5 minutes. Very, very awesome.
Thread Starter
Registered User
iTrader: (2)
Joined: Nov 2002
Posts: 1,644
From: Lawrence, Kansas
Car Info: 19' Impreza Sport Manual / 99 Miata / 13' OB
Yes both fronts and rears are the same size, the same size also fits the Subaru STi 4-Pots not sure about the 04' USDM STi Brembo's. (something I was not sure of till I had a chance to fit them)
Peaty,
another quick question.
Is the thread pattern 7mm x 1.0 - Overall Length 34mm?
on the back of your package it says 7M x 1.0. which is the right one? are they both the same?
another quick question.
Is the thread pattern 7mm x 1.0 - Overall Length 34mm?
on the back of your package it says 7M x 1.0. which is the right one? are they both the same?
Thread
Thread Starter
Forum
Replies
Last Post
inthedeck
Suspension, Handling, and Brakes
6
Oct 22, 2003 06:53 PM
OakosAutomotive
Vendor Group Buys/Specials
11
Oct 15, 2003 01:10 PM