Replacement Rotos for Prodrive/Alcon
Guest
Posts: n/a
Replacement Rotos for Prodrive/Alcon
Hi all,
I have a set of Prodrive OEM Alcon 4 pod brake installed on my 2002 WRX. They are using 330mm by 28mm rotors one solid piece.
The rotors and the pads are on their last leg of service and I am looking for replacement. However, I am looking for a 2 piece rotor (Rotor and Hat) as well as brake pads.
Went through a couple of US web sites. Wrote a couple of mails to Performance Friction with no replies.
Wonder if anyone can help me here. I am desperate.
(Note: The Prodrive brake kit is the same as the BAER Pro brake kit. Anyone knows the Alcon model code for the Caliper?)
I have a set of Prodrive OEM Alcon 4 pod brake installed on my 2002 WRX. They are using 330mm by 28mm rotors one solid piece.
The rotors and the pads are on their last leg of service and I am looking for replacement. However, I am looking for a 2 piece rotor (Rotor and Hat) as well as brake pads.
Went through a couple of US web sites. Wrote a couple of mails to Performance Friction with no replies.
Wonder if anyone can help me here. I am desperate.
(Note: The Prodrive brake kit is the same as the BAER Pro brake kit. Anyone knows the Alcon model code for the Caliper?)
Registered User
iTrader: (2)
Joined: Nov 2002
Posts: 955
From: Mann Engineering, Santa Clara, CA
Car Info: 13BRZ, 11FXT, 08T25, 07STI, 02WRX
StopTechs are 328x28mm. I am not sure about the way it is offset though. But I doubt that 2mm in diameter is going to make a HUGE difference. I do know that replacement rotors for that brake kit is really expensive and not even funny.
Guest
Posts: n/a
Have you contacted Baer?
A lot of their two piece rotors are based on Alcon dimensions and I know they do a 330mm x 28mm two piece rotor.
Our 13" two piece Subaru rotors are to suit an STi WRX which are 326mm x 30mm fitted with Brembo calipers. I doubt they will fit.
A lot of their two piece rotors are based on Alcon dimensions and I know they do a 330mm x 28mm two piece rotor.
Our 13" two piece Subaru rotors are to suit an STi WRX which are 326mm x 30mm fitted with Brembo calipers. I doubt they will fit.
Guest
Posts: n/a
Originally posted by dbasteve
Have you contacted Baer?
A lot of their two piece rotors are based on Alcon dimensions and I know they do a 330mm x 28mm two piece rotor.
Our 13" two piece Subaru rotors are to suit an STi WRX which are 326mm x 30mm fitted with Brembo calipers. I doubt they will fit.
Have you contacted Baer?
A lot of their two piece rotors are based on Alcon dimensions and I know they do a 330mm x 28mm two piece rotor.
Our 13" two piece Subaru rotors are to suit an STi WRX which are 326mm x 30mm fitted with Brembo calipers. I doubt they will fit.
Guest
Posts: n/a
Originally posted by SGREX
Hi Steve, any contacts for me?
Hi Steve, any contacts for me?
3108W. Thomas Rd, Suite 1201
Phoenix, Az 85017-5306
Phone +1 602 233 1411
Fax +1 602 352 8445
The only contact names I have are the owners. I will find out who to talk to and let you know.
Guest
Posts: n/a
Sorry I just saw that you are in Singapore.
You could try,
International Motor Sports promotions
Hong Kong,
ph +852 255 53939
fax +852 250 31128
They are an Alcon distributor and should have access to the two piece version of your Prodrive rotor.
Another lead; The one piece Prodrive rotor is based on a C4 Corvette design and you may be able to source a Corvette two piece to suit. It will probably be cheaper.
You could try,
International Motor Sports promotions
Hong Kong,
ph +852 255 53939
fax +852 250 31128
They are an Alcon distributor and should have access to the two piece version of your Prodrive rotor.
Another lead; The one piece Prodrive rotor is based on a C4 Corvette design and you may be able to source a Corvette two piece to suit. It will probably be cheaper.
Guest
Posts: n/a
Originally posted by SGREX
Thanks Steve. C4 Corvette runs on same PCD as a WRX?
Thanks Steve. C4 Corvette runs on same PCD as a WRX?
Subaru PCD = 100mm
Most of these type of rotors are stocked as blanks with no stud holes. You'll need to check with the supplier.
Baer Contact;
Craig Hedman
CraigH@baer.com
602-233.1411
Dork
Joined: Nov 2002
Posts: 144
From: SF Bay Area
Car Info: 2005 STi, 2005 OXT
Hello,
Wow, nice customer service by Steve there... for a non customer, too. Thanks for your replies Steve. Where's that button to rate vendors?
Joel, with nothing else useful to add.
Wow, nice customer service by Steve there... for a non customer, too. Thanks for your replies Steve. Where's that button to rate vendors?
Joel, with nothing else useful to add.
Guest
Posts: n/a
Originally posted by Joel Gat
Hello,
Wow, nice customer service by Steve there... for a non customer, too. Thanks for your replies Steve. Where's that button to rate vendors?
Joel, with nothing else useful to add.
Hello,
Wow, nice customer service by Steve there... for a non customer, too. Thanks for your replies Steve. Where's that button to rate vendors?
Joel, with nothing else useful to add.
If I can help....why not?
Thread
Thread Starter
Forum
Replies
Last Post
drpsnwbrdr
NorCal Classifieds
42
Jan 14, 2014 12:25 PM
akcel
New Aftermarket Car Parts For Sale
0
Jan 31, 2008 10:11 AM
DoomE.Q.
Suspension, Handling, and Brakes
13
Apr 17, 2004 06:38 AM
