kyb agx
Thread Starter
Registered User
Joined: Jun 2003
Posts: 67
From: new england
Car Info: 98 impreza 2.5 rs
kyb agx
hi, first up, i have a 98 rs. im thinking of getting the kyb agx struts... wondering if i can keep the springs that are there (stock?) with the new struts ? .....and, lol, ....can i cut a half inch ( ill try to figure out how much exactly later) off the bottom of the spring to lower it a tad ??? if its stock, is it a progresive rate spring ? ...i might be talking out of my ***, but im trying to get by with very limited funds. thanks for all your help, later.
Registered User
iTrader: (1)
Joined: Oct 2005
Posts: 39
From: bremerton
Car Info: 1996 beretta, dented and grey, but i still smash on hondas
the struts should work, i wouldnt recommend cutting ur springs. the ride quality would go down hill. look on ebay for a cheap set
Registered User
iTrader: (5)
Joined: Jan 2005
Posts: 1,179
From: "Now you're just splittin' hairs."
Car Info: 04 Toyota Tacoma
They should work with the springs you have but DO NOT cut them. The springs were engineered for that specific car and it's weight, cutting them will cause poor ride as well as a possible failure and improper seating of the spring on the strut.
Thread Starter
Registered User
Joined: Jun 2003
Posts: 67
From: new england
Car Info: 98 impreza 2.5 rs
there will be no cutting ...lol. thanks. ill probably just keep the springs i have on there now... any ideas on cheap springs that would lower it a bit ??
thanks....
thanks....
Thread
Thread Starter
Forum
Replies
Last Post




