Ok here is the problem.... My front caliper boot ripped on the slidder pin/bolt? and rusted up and is basically froze up. My question is: is there a rebuild kit to replace them or am i stuck having to buy a new one? Help anyone....

 

Just buy a new one. You can get OEM parts at the dealer to rebuild it of course, but thats a pain in the ***. Advanced Auto Parts has a good selection of caliper parts. But you don't want to screw it up. Good Story.

I was towing my rally car back from the COG rally with my K5 blazer full of gear and people when I lost a boot comming out of the mountains. I had to take an exit at 70mph and blast through a red light with trailer and all onto a rather buissy street. God Bless there was no traffic comming or it would have been nasty. Took a set of vice grips to the brake line and drove it home from there. SO be careful.

 

I' ll check with them tomorow. Thanks for the info.

 

my impreza slider bolts came out the caliper pins stayed and it didnt faLL off lucky i was. i was doing like 125 mph heard pink pink sound lol. i coulnt find crap at auto idiot zone for pins and bolts. i just orderd from dealer found out theres top and bottom pins "they look identical" funy enough they didnt even stock them so im waiting a week for them. my temporary fix i took the 12 mm bolts out my honda accord they fit right and where same lenght but impreza ones are 14mm scary buisness. they havent popped back out yet

 

How much did you pay for them?

 

they where 13.99 usd