I put Sparco 4 point harnesses in my 03 REX and took out the stock 3 points. Now my Air Bag Light is on. Its been on for about a month now and I figured the bulb would have blown by now. Anyone know of a way to turn that off? It is annoying to have that little red light on all the time.

Nick

 

The air bag senses a person through the seat belt connection, by taking the stock belts out the air bag system will not work properly.

 

there is a switch in the seat belt plug, you can try hooking up a test light to see if it is a ground or power switch. just connect the wire to the proper source and your light should be taken car of.

the "bulb" is an led. mine has been on for 1 year and is still glowing strong!

 

What would be a proper source?

Nick

 

proper source depends... if it needs ground, you could tap a wire to any chassis part, if it need +12v then and 12 volt signal that is switched on with the car would be good. i could tell you where exactly to get it, but i don't know what signal the light needs to be switched off.

 

Could I connect that power wire to a 12V toggle switch?

Nick

 

you could connect it, but make sure that 12v to that wire turns off the airbag light first, otherwise it wont do much good.

 

Thanks, Ill give it a try. If there are any other suggestions please feel free to give them.

Thanks,
Nick