Wire Layout in front doors of '04 WRX with factory tweeters
#1
Guest
Posts: n/a
Wire Layout in front doors of '04 WRX with factory tweeters
Hey,
Question for you guys, how does the factory wires come into the front 2 doors? Does it split at the head unit to send power to the tweeters and midrange or does it split internally in the door? I am going to be replacing all my speakers and just want to have an idea what I am getting into before I get a suprise. Any pics or schematics would be very helpful.
Thanks,
Jay
Question for you guys, how does the factory wires come into the front 2 doors? Does it split at the head unit to send power to the tweeters and midrange or does it split internally in the door? I am going to be replacing all my speakers and just want to have an idea what I am getting into before I get a suprise. Any pics or schematics would be very helpful.
Thanks,
Jay
#2
don't know the exact wiring, but somebody told me they get the same signal... only the tweeter has a capacitor which filters out the mid and bass.
what i did is (instructed by east coast scooby): unhook the wiring harness on the tweeter, use the wires going into the stock midrange for the new speaker. it works fine.
what i did is (instructed by east coast scooby): unhook the wiring harness on the tweeter, use the wires going into the stock midrange for the new speaker. it works fine.
Thread
Thread Starter
Forum
Replies
Last Post
Imprezer
Engine/Power - EJ20T (pre-2006 WRX and JDM)
6
07-21-2005 06:55 AM
dexterous
Stereo & Security
3
05-07-2003 10:38 AM