Places in Denver to get mods installed?
#1
Guest
Posts: n/a
Places in Denver to get mods installed?
Anybody know who in the Denver area can do WRX mods? I'm not really comfortable with doing them myself.
I tried Flatirons Subaru in Boulder, but they aren't doing mods at the moment. I also called a few small places, but no luck so far.
Suggestions?
I'm initially looking to get some basic stuff done (sway bar, brake lines/pads/fluid). Later on I'd like to get some stuff like a turboback exhaust upgrade and maybe even some coilovers.
I tried Flatirons Subaru in Boulder, but they aren't doing mods at the moment. I also called a few small places, but no luck so far.
Suggestions?
I'm initially looking to get some basic stuff done (sway bar, brake lines/pads/fluid). Later on I'd like to get some stuff like a turboback exhaust upgrade and maybe even some coilovers.
#2
www.flat4engineering.com (Mike Shaw Subaru)
Speedy Rupair 303-343-3619 in Aurora
Mike shaw has ppl who worked at flatirons (Bret) who could probably help you.
Dave at Speedy Rupair has great labor rates -tell him Rafael sent you and he'll take care of you. He installed my Perrin Pulley, so I'm pretty sure he'll be able to help with mods
Speedy Rupair 303-343-3619 in Aurora
Mike shaw has ppl who worked at flatirons (Bret) who could probably help you.
Dave at Speedy Rupair has great labor rates -tell him Rafael sent you and he'll take care of you. He installed my Perrin Pulley, so I'm pretty sure he'll be able to help with mods
#4
Guest
Posts: n/a
Originally posted by regg01
www.flat4engineering.com (Mike Shaw Subaru)
Speedy Rupair 303-343-3619 in Aurora
Mike shaw has ppl who worked at flatirons (Bret) who could probably help you.
Dave at Speedy Rupair has great labor rates -tell him Rafael sent you and he'll take care of you. He installed my Perrin Pulley, so I'm pretty sure he'll be able to help with mods
www.flat4engineering.com (Mike Shaw Subaru)
Speedy Rupair 303-343-3619 in Aurora
Mike shaw has ppl who worked at flatirons (Bret) who could probably help you.
Dave at Speedy Rupair has great labor rates -tell him Rafael sent you and he'll take care of you. He installed my Perrin Pulley, so I'm pretty sure he'll be able to help with mods
- Charlie
#5
those mods you say you want to do
are EXTREMELY simple
dont' pay someone to do those
its really easy
and this is comin from an 18 year old who's never touched a car until now :P
i've done all those and its really easy
are EXTREMELY simple
dont' pay someone to do those
its really easy
and this is comin from an 18 year old who's never touched a car until now :P
i've done all those and its really easy
#6
Originally posted by Bussman61
How much did it cost to install your pulley? I couldn't do it for my Legacy, so I'm either gonna have someone else install it (professionally) or just sell it.
- Charlie
How much did it cost to install your pulley? I couldn't do it for my Legacy, so I'm either gonna have someone else install it (professionally) or just sell it.
- Charlie
#7
Guest
Posts: n/a
Originally posted by regg01
Dave charged me I think $30 bucks to install my pulley. It took maybe 1/2 hour and I watched him do it. He's a Subaru Specialist BTW (ie. he worked for a dealer, now has his own shop). I don't trust myself enough to do any work on my car-except the very basic-especially now that I have a really good and reasonably priced tech like Dave to do the work. If you do go to him, tell him Rafael sent you and he'll hook you up.
Dave charged me I think $30 bucks to install my pulley. It took maybe 1/2 hour and I watched him do it. He's a Subaru Specialist BTW (ie. he worked for a dealer, now has his own shop). I don't trust myself enough to do any work on my car-except the very basic-especially now that I have a really good and reasonably priced tech like Dave to do the work. If you do go to him, tell him Rafael sent you and he'll hook you up.
Thanks!
- Charlie
#8
Guest
Posts: n/a
I got my stuff installed last week at Mike Shaw and I'm glad I did. Yeah, I do feel a bit silly paying somebody to do easy installs; I'm just not the DIY type I guess.
Anyway, they were very fast, though not particularly cheap. But I do dig the new feel of the brakes and the cornering. I'm happy.
Anyway, they were very fast, though not particularly cheap. But I do dig the new feel of the brakes and the cornering. I'm happy.
#9
Guest
Posts: n/a
Steve
Contact us and we will take care of you.
Mike Shaw Subaru
1650 w 104th ave
Thornton CO 80234
303.438.7524 parts
www.mikeshawsubaru.com
www.flat4engineering.com
Also if you are interested check this post
http://www.clubwrx.net/forums/showth...threadid=43495
Thank you.
Joseph
Contact us and we will take care of you.
Mike Shaw Subaru
1650 w 104th ave
Thornton CO 80234
303.438.7524 parts
www.mikeshawsubaru.com
www.flat4engineering.com
Also if you are interested check this post
http://www.clubwrx.net/forums/showth...threadid=43495
Thank you.
Joseph
#10
Guest
Posts: n/a
Hi Joseph, glad to see you guys hang out on the forums.
I already got my "easy" mods installed by you guys and it went fine. (though it was a bit more expensive than I was figuring)
btw, if I had known about you guys, I would have bought the parts from you guys instead of on my own - your prices were a little better anyway! I am planning on getting some less trivial stuff done in the near future, so I'll keep that in mind for next time.
I already got my "easy" mods installed by you guys and it went fine. (though it was a bit more expensive than I was figuring)
btw, if I had known about you guys, I would have bought the parts from you guys instead of on my own - your prices were a little better anyway! I am planning on getting some less trivial stuff done in the near future, so I'll keep that in mind for next time.
Thread
Thread Starter
Forum
Replies
Last Post
qbbraveheart
Tri-State
5
11-18-2003 12:10 PM
aftermarket, car, club, denver, forum, good, installed, jdm, modifications, mods, parts, rupair, specialist, speedy, subaru