sleeper legacy lives!!!
Guest
Posts: n/a
sleeper legacy lives!!!
well, i finally got the sleeper legacy project on the road. it took me 3 years, but so far its been well worth it.
heres the specs:
93 legacy L 2wd 5sp
paeco shortblock 2.2 n/a
11-1 cr ceramic coated pistons
ported and polished heads
torque cams
high speed valve springs
engine balanced and blueprinted
370cc jdm nissan injectors
255lph walbor fuel pump
safc-II
autometer a/f and egt gagues
kevlar clutch
flywheel lightened 7 lbs
sti motor mounts
custom 2wd sti tranny mount
16" 2.5gt alloys (9 double spoke silver)
turbo legacy spoiler and scoop
rear sway bar and brackets from another legacy
its running pretty well right now, but i need to resolve some fuel management issues at wot. (see my thread in engine management) im just pretty stoked that an engine that i built myself actually runs. (paeco assembled the shortblock, but i did the rest)
anyone else running a similar setup in a first generation legacy? i dont know if ive talked to anyone else who has done a 2.2 n/a engine build.
happy motoring,
josh mould
heres the specs:
93 legacy L 2wd 5sp
paeco shortblock 2.2 n/a
11-1 cr ceramic coated pistons
ported and polished heads
torque cams
high speed valve springs
engine balanced and blueprinted
370cc jdm nissan injectors
255lph walbor fuel pump
safc-II
autometer a/f and egt gagues
kevlar clutch
flywheel lightened 7 lbs
sti motor mounts
custom 2wd sti tranny mount
16" 2.5gt alloys (9 double spoke silver)
turbo legacy spoiler and scoop
rear sway bar and brackets from another legacy
its running pretty well right now, but i need to resolve some fuel management issues at wot. (see my thread in engine management) im just pretty stoked that an engine that i built myself actually runs. (paeco assembled the shortblock, but i did the rest)
anyone else running a similar setup in a first generation legacy? i dont know if ive talked to anyone else who has done a 2.2 n/a engine build.
happy motoring,
josh mould
iClub Silver Vendor
iTrader: (25)
Joined: Nov 2002
Posts: 15,494
From: Participating in some Anarchy!
Car Info: 2005 LGT wagon
Hey Josh, I don't wanna harsh your high, but where are the pictures!?!
However, you should be proud about the motor build. WHere are the pistons from? How much $$ do you think you've spent?
Again, congrats!
Paul
However, you should be proud about the motor build. WHere are the pistons from? How much $$ do you think you've spent?
Again, congrats!
Paul
Guest
Posts: n/a
video
well, ive been tenative to post pics because the car is maroon with a white bumper, and black scoop and wing. its not really cosmetically done yet, but ill do the best i can. im gonna have to take some video and capture it with my video card if i can get it to work.
wish me luch,
josh mould
wish me luch,
josh mould
Guest
Posts: n/a
numbers
not sure about numbers yet. but dyno says its alot faster, but i am still in the process of breaking in the engine, so im not sure how much faster...
hopefully i will be looking at around 200ish hp.
i still need an oil cooler, adjustable fpr, etc...
take er easy
josh mould
hopefully i will be looking at around 200ish hp.
i still need an oil cooler, adjustable fpr, etc...
take er easy
josh mould
VIP Member
iTrader: (9)
Joined: Nov 2002
Posts: 4,665
From: No So Co
Car Info: '00 BRP RS Sedan / '04 PSM FXT (RIP)
Only since '97 have Subaru's been solely AWD. There are quite a few FWD Subaru's still rolling around. That's a loooong list of mods for a FWD Subaru. It'd still be cool to see some pics when you get a chance.
-Brian
-Brian
Thread
Thread Starter
Forum
Replies
Last Post
HongKongBeef
Bay Area
18
Dec 16, 2002 09:11 PM
