Weatherstrip loose
Guest
Posts: n/a
The rubber strip that seals the rear door window (towards the small rear side window) popped out when i had to sqeeze myself out of the rear seat, from the roof and back and was only held in place with a clip at the end. I managed to push it back in, but it is extremely easy to pull it out again. Anyone else had this problem and know how to fix it? Shouldn´t it be glued to the body? The Subaru part name is "Weatherstrip assy, roof body side".
Guest
Posts: n/a
Hey man I had a problem like that too but mine came loose on the right rear door. The weather stripping attached to the upper part of the car just came unglued and fell off.
So I took some 3M spray adhesive ( what a fancy name for glue) and sprayed it on the weather stripping and then stuck in back on. I used some tape till the glue dryied, but since then I have had no problems. Hope this helps. Sorry.
So I took some 3M spray adhesive ( what a fancy name for glue) and sprayed it on the weather stripping and then stuck in back on. I used some tape till the glue dryied, but since then I have had no problems. Hope this helps. Sorry.
Thread
Thread Starter
Forum
Replies
Last Post
gpatmac
Hawaii
2
Apr 17, 2003 10:37 AM




