Another 12v power source?
Thread Starter
VIP Member
iTrader: (14)
Joined: May 2003
Posts: 8,675
From: Wherever Sucks the Most
Car Info: 2003 WRX, 2008 Camry
Another 12v power source?
Are there any other 12v sources i can tap into other than the positive terminal of my battery? Im running a few electrical applications like sprayer etc. and i don't want those wires to run through my firewall because it's causing too much clutter.
thanks, eric
thanks, eric
Registered User
iTrader: (2)
Joined: Nov 2002
Posts: 1,644
From: Lawrence, Kansas
Car Info: 19' Impreza Sport Manual / 99 Miata / 13' OB
Is this a wagon? If not an you don't have two pumps in the washer fluid tank, you will see a plug just hanging out there doing nothing by the one pump you do have. That is normally for the rear washer pump. I used that wire for headlamp washers. You can find one of the ends under the dash and when you ground it (using a switch) you can have a power source for a relay or something w/o running wires here and there through the fire wall.
Have a look in this thread:
http://www.scoobymods.com/forums/sho...s=&threadid=61
The info is in there somewhere. If you have a wagon then well, nevermind
Peaty
A few pics:
Have a look in this thread:
http://www.scoobymods.com/forums/sho...s=&threadid=61
The info is in there somewhere. If you have a wagon then well, nevermind
Peaty
A few pics:
Thread Starter
VIP Member
iTrader: (14)
Joined: May 2003
Posts: 8,675
From: Wherever Sucks the Most
Car Info: 2003 WRX, 2008 Camry
Thanks Peaty good idea but i'd still be running wires through the fire wall. Is there any way i can tap into the cigarette lighter? any "how to" instructions on that perhaps?
thanks, eric
thanks, eric
Registered User
iTrader: (2)
Joined: Nov 2002
Posts: 1,644
From: Lawrence, Kansas
Car Info: 19' Impreza Sport Manual / 99 Miata / 13' OB
For going through the fire wall AFAIK all scoobies have this spot:
http://www.scoobymods.com/forums/sho...&threadid=2406
And yes I like using the cig lighter spot too, taking your dash off will be different but here is how I did mine:
http://www.scoobymods.com/forums/sho...&threadid=2005
If you have a WRX look here for how to get the dash off to get to the lighter wires:
http://www.scoobymods.com/forums/sho...=&threadid=205
http://www.scoobymods.com/forums/sho...&threadid=2406
And yes I like using the cig lighter spot too, taking your dash off will be different but here is how I did mine:
http://www.scoobymods.com/forums/sho...&threadid=2005
If you have a WRX look here for how to get the dash off to get to the lighter wires:
http://www.scoobymods.com/forums/sho...=&threadid=205
Thread Starter
VIP Member
iTrader: (14)
Joined: May 2003
Posts: 8,675
From: Wherever Sucks the Most
Car Info: 2003 WRX, 2008 Camry
I think im going to go with your second option seeing how my ic sprayer switches are mounted by the e-brake. Is it possible to tap the positive wire twice for two switches? Or maybe tap it once with a long piece of wire, then tap that wire twice? there's plenty of power in that wire right Peaty? im not going to loose power going to the lighter socket am I?
eric
eric
Originally posted by Peaty
For going through the fire wall AFAIK all scoobies have this spot:
http://www.scoobymods.com/forums/sho...&threadid=2406
And yes I like using the cig lighter spot too, taking your dash off will be different but here is how I did mine:
http://www.scoobymods.com/forums/sho...&threadid=2005
If you have a WRX look here for how to get the dash off to get to the lighter wires:
http://www.scoobymods.com/forums/sho...=&threadid=205
For going through the fire wall AFAIK all scoobies have this spot:
http://www.scoobymods.com/forums/sho...&threadid=2406
And yes I like using the cig lighter spot too, taking your dash off will be different but here is how I did mine:
http://www.scoobymods.com/forums/sho...&threadid=2005
If you have a WRX look here for how to get the dash off to get to the lighter wires:
http://www.scoobymods.com/forums/sho...=&threadid=205
If you plan on hooking up a lot of switches then I would run one good sized wire from the battery through the firewall, then you could hook up all of the leads to that. Your cig lighter may not be able to handle a huge load.
Thread
Thread Starter
Forum
Replies
Last Post
dropkick_muppet
Stereo & Security
1
Jul 25, 2004 03:54 PM



