Here's one beatiful piece from Japan. It's manufactured by Beatrush and quality and fitment is excellent. This product is actually easier to install and remove than the stock undertray. Plus it has opening slits to draw out heat from the engine. Changing the oil is easy, it only requires the removal of rear bolts. On the road it makes the car less bouncier and great to drive at higher speeds. The Beatrush underpanel makes the hole under front flat, unlike stock which cuts short and has multiple shapes.

We fitted this on a stock bumper and Varis front lip and fitment is perfect. Makes the whole bottom part flat, to reduce air turbulance. Plus, their will be no worries about the undertray melting from aftermarket headers.

Moreover, the Beatrush underpanel can be fited to any aftermarket bumper since it attaches to the frame of the car. Enough talking, here are some pictures:

 

my god.... i want!!! i want!!! i want!!!!

 

and where about could we obtain that polished beauty. Does it serv as protection from road debris also?

 

^You can purchase this product through our website or click on the link below for direct check out:

http://www.kamispeed.com/product_inf...9220c8b22296c8



With year of experience in motor sports, Laile; which manufactures, brands, and operates Beatrush; has collected sufficient data information on the tracks of Japan to produce high quality and functional products. Located in Yokohama, Japan; Laile manufactures most of their product's brands like Beatrush and Arpsports with their high precision machinery. All the unique products developed by Laile offers superior safety and plenty of pleasure both in track and the street, as well to look at.

•Fits 02-Up WRX & STI stock bumpers and most after market bumpers
•Reduces air turbulance, thus producing more downforce.
•Great mod for aftermarket headers, which usually melt the stock plastic.
•Helps to cool down engine by drawing out heat from the engine compartment through especial design slits.
•Protects under the engine from rocks and gravel during heavy competition like rally, auto-x, etc.
•Track tested for functionality.
•Developed by Beatrush Japan, the leaders of competition.

 

It looks nice, what type of aluminum is it made out of and what is the thickness of it?

 

Its 2mm thick 5052 high grade aluminum for strength and light weight features. All of Beatrush products are made in their in house factory in Yokohama, Japan:

Here are some pictures of their machinery:





Here's the official website translated in English with babelfish:
http://babelfish.altavista.com/babel...s%2findex.html

 

A couple questions: 1. Will this bolt up to the factory subframe, or is the beatrush subframe required? 2. Will this interfere with my Cusco version 2 lower arm bar? 3. Is the Beatrush subframe compatible with the Cusco version 2 lower arm bar? Thanks!

 

^
1. Yes, it will bolt up to the factory subframe. The Beatrush subframe is not required.
2. No, it will not interfere with the Cusco lower arm, as it has enough space in between.
3. We don't have an answer for this, since both have not been installed together.

 

nice, how much shipped to 90623?

 

The Beatrush underpanel is $290 shipped to your house via FedEx. Product is in stock and ready to go. Please call us for further assistance. Thank you.

 

i'll definately be picking this up soon. i'll see how much i have after this xmas season is over.
jeff