Beatrush Aluminum Underpanel- IN STOCK @ 201 Motorsports!
Thread Starter
Registered User
Joined: Mar 2007
Posts: 133
From: New Jersey
Car Info: 2003 Mitsubishi Evolution VIII
Beatrush Aluminum Underpanel- IN STOCK @ 201 Motorsports!
Beatrush Aluminum Underpanel @ 201 Motorsports
With years of experience in motorsports, Laile, (which manufactures, brands, and operates Beatrush) has collected sufficient data information on the tracks of Japan to produce high quality and functional products. Located in Yokohama, Japan; Laile manufactures most of their product's brands like Beatrush and Arpsports with their high precision machinery. All the unique products developed by Laile offer superior safety and plenty of pleasure both in track and the street, as well to look at.
Beatrush Aluminum Underpanel WRX/STi
Price: $195 shipped
With years of experience in motorsports, Laile, (which manufactures, brands, and operates Beatrush) has collected sufficient data information on the tracks of Japan to produce high quality and functional products. Located in Yokohama, Japan; Laile manufactures most of their product's brands like Beatrush and Arpsports with their high precision machinery. All the unique products developed by Laile offer superior safety and plenty of pleasure both in track and the street, as well to look at.
Beatrush Aluminum Underpanel WRX/STi
# Fits 02-Up WRX & STI stock bumpers and most after market bumpers
# Air turbulence is significantly reduced, producing a more stable ride at higher speeds and increasing down force by creating higher suction pressures between the panel and road.
# Engine temperatures are reduced and stabilized by removing heat from the engine compartment with specialized slits made to draw out hot air while the vehicle is in motion. This is successfully achieved during the creation of down force, as this negative pressure sucks out the heat and is then swooped out by colder air moving underneath.
# Provides greater protection under the engine than stock plastic panels during heavy track or circuit racing competitions.
# Track tested & developed by Beatrush, Japan.
# Air turbulence is significantly reduced, producing a more stable ride at higher speeds and increasing down force by creating higher suction pressures between the panel and road.
# Engine temperatures are reduced and stabilized by removing heat from the engine compartment with specialized slits made to draw out hot air while the vehicle is in motion. This is successfully achieved during the creation of down force, as this negative pressure sucks out the heat and is then swooped out by colder air moving underneath.
# Provides greater protection under the engine than stock plastic panels during heavy track or circuit racing competitions.
# Track tested & developed by Beatrush, Japan.
Registered User
iTrader: (1)
Joined: Mar 2003
Posts: 660
From: PA
Car Info: TXS tbe, perrin goodies, v7 sti struts...bla bla bla lots of stuff!
How does this mount? Using stock bolt holes?
Reason I ask is all 3 of the stock front bolt holes that held in m y STOCK plastic pan are shot via broken bolts that held it in..
If these use different holes other than the stock location this would be ideal!!
Thanks much,
-Nigel
Reason I ask is all 3 of the stock front bolt holes that held in m y STOCK plastic pan are shot via broken bolts that held it in..
If these use different holes other than the stock location this would be ideal!!
Thanks much,
-Nigel
Thread
Thread Starter
Forum
Replies
Last Post
anonypuff
NorCal Classifieds
21
Jun 10, 2010 10:34 AM
201Motorsports
Suspension / Brakes / Handling / Wheels / Tires
1
Nov 20, 2007 07:03 AM
201Motorsports
Engine and Drivetrain
0
Nov 20, 2007 06:58 AM
Kami Speed
Suspension / Brakes / Handling / Wheels / Tires
3
Jul 3, 2007 08:47 AM
MachIII
Suspension / Brakes / Handling / Wheels / Tires
49
Sep 15, 2006 01:20 PM
