turbo leaking...HELP!
Thread Starter
Registered User
iTrader: (38)
Joined: Feb 2004
Posts: 1,361
From: mr. police officer,im not as think as you drunk i am....
Car Info: 02 wrx
turbo leaking...HELP!
my oil feed line is leaking oil off turbo. any of you guys had to have a fitting fabricated for that line.
Thread Starter
Registered User
iTrader: (38)
Joined: Feb 2004
Posts: 1,361
From: mr. police officer,im not as think as you drunk i am....
Car Info: 02 wrx
i new my neighbor was right about that.dont know where i'd be without that guy helping me out.
if your'e on here (TAI) THANKS BIG TIME!!!!!!!!!!!
if your'e on here (TAI) THANKS BIG TIME!!!!!!!!!!!
Originally Posted by iNfEk
you can go to hydra air... I think they are located off of nimitz hwy...
Registered User
iTrader: (4)
Joined: Nov 2002
Posts: 334
From: KPT
Car Info: 2011 KTM 530 EXC Supermoto
Is it leaking from the banjo or line? Is this a stock line or a line that came with the kit?
If its the banjo, check both gaskets/ washers. They may be crushed, cracked, or warped and may not seal properly. Check to see if the oil bolt (I'm no too sure the actual name) has its hole aligned to the oil line.
If you do need a fabricated line, I suggest Hydra Air. I got mine for a little over $50 with fittings.
Best of luck!
If its the banjo, check both gaskets/ washers. They may be crushed, cracked, or warped and may not seal properly. Check to see if the oil bolt (I'm no too sure the actual name) has its hole aligned to the oil line.
If you do need a fabricated line, I suggest Hydra Air. I got mine for a little over $50 with fittings.
Best of luck!
Thread
Thread Starter
Forum
Replies
Last Post
20007WRX4ME88
Engine/Power - EJ25T (STI and 2006+ WRX)
6
Jun 4, 2008 05:24 PM
asydbern
Engine/Power - EJ20T (pre-2006 WRX and JDM)
3
Jun 30, 2006 12:20 PM
phreak9i6
Engine/Power - EJ20T (pre-2006 WRX and JDM)
3
Jul 5, 2005 11:38 AM