help troubleshooting p302 code
help troubleshooting p302 code
hey guys i have an o4 sti with an accessport running stage 2 and a cobb turboback. it has only 4400 miles on it and i drive it maybe 2 or 3 times a month. a few months ago it started idling, and running rough and threw a p302 code (#2 cylinder missfire). i swapped the coil packs and plugs between cylinders 2 and 4 with no change. today i swapped injectors between 2 and 4 and took it for a drive but no change and threw another p302 cel code. my next check will be a compression check but aside from that has anyone else with an o4 sti had this problem and any suggestions? i don't drive the car really hard but i do get on it once in a while and i'm hoping it's not a cracked ringland.
thanks
thanks
yeah if my compression test checks out ok i might need to go and see them since i don't know what else to change. has anyone else with an 04 sti experienced this problem? i know i can't be the only one.
thanks
thanks
yes i think i checked them all. the only connection that i removed was the intercooler when i did my downpipe install. i did my compression check today and this is what i got: #1-143psi, #2-140psi, #3-140psi, and #4-142 psi. i let the car warm up for only about 10 minutes to get it up to operating temperature which is maybe why the numbers are so low. what do you guys think of these numbers?
thanks
thanks
VIP Member
iTrader: (39)
Joined: Jun 2005
Posts: 4,939
From: Seibukan Dojo /HI. Kendo Federation
Car Info: Seishin-teki kyōkō/Intonjutsu/Shinobi-ir
Is the rough idling happening at low rpms? iirc, maybe ur front o2 sensor is going since u did all the changes listed above. -walt
Thread
Thread Starter
Forum
Replies
Last Post
BluRu05
Engine/Power - EJ20T (pre-2006 WRX and JDM)
1
Apr 10, 2010 09:01 PM
landtuna
Suby Shopping & Maintenance/Warranty
18
Oct 14, 2003 01:36 PM




