so hopefully someone out there has/had this problem. i got bc/br coilovers and i hadnt messed with the height since i put them on about a year and 1/2 ago. so now it seems stuck. this particular set up adjusts height thru the part that connects to the hub not the two locking rings that hold up the springs. i already sprayed it with that pb blaster lube thing but still nothing. im not anywhere near being a burly guy but holy ****. i dont want to take the thing off the hub either having no air tools. so im just hoping some one can chime in with some thing i havent thought of yet.

 

well i used pb blaster and a large set of channel locks to break it free but note it will cause some markings on the adjuster hope this helps

 

well usually what i do is loosen the lower locking collar at the very bottom, then i use the adjuster wrench on the top locking ring while its still locked and turn it to the direction you want. hope this helps.

 

here hope this helps. did the best i could to explain.

 

thanks guys! yeah tried that but the strut wont budge. hoping letting the pb blaster marinate for a day will help some.

 

Hey, I had the same problem. Soaked it with WD-40 and prayed.
Then we took it off the car and pounded away to twist the collar.