Engine/Power - EJ20T (pre-2006 WRX and JDM) There is replacement for displacement, it is forced induction - OEM 2.0 liter turbo engines in the USDM WRX. 90-94 Legacy Turbo EJ22 turbo engines can also be discussed here.

vishnu stage 0

Thread Tools
 
Search this Thread
 
Old 02-27-2003, 08:36 PM
  #2  
VIP Member
iTrader: (1)
 
EtchyLives's Avatar
 
Join Date: Nov 2002
Location: Plymouth, MN
Posts: 2,518
Car Info: 94 T-Leg Sedan and a 00 M5
1. reliability- Vishnu is about the best in the business for reliability. They tune conservatively and make great parts.

2. Everything except the uppipe is pretty easy. That's going to take some work. It might be easier to find a *nice* dealer.

3. No effect other than getting you to work quicker. Totally drivable

Your concerns are valid, but with a few safeguards, you'll be OK.
1. Set your boost for 15psi and no touchy. No turbo problems.
2. No worries about the rods. Subaru engines are strong.
3. This much power will not have any negligible effect on your tranny. Until you start hitting ~350 or so you should be just fine. If you tear it up hard when you go to work (i.e. launching from stoplights or doing something stupid like revving and not letting the clutch slip) you may burn your clutch a little prematurely. Otherwise you'll be just fine.

Vishnu Stage 0 is about the tamest upgrade you can do. You should have NO WORRIES.
-Etch
EtchyLives is offline  
Old 02-27-2003, 08:46 PM
  #3  
cnk
Registered User
 
cnk's Avatar
 
Join Date: Feb 2003
Posts: 49
Actually. . you won't have to worry about adjusting boost as the new Stage kits get a remapped Ecutek ECU so the stock FBC controls boost.

I have Stage 1 and absolutely love it. Very smooth and reliable. It's amazing the way it transforms the car. You'll love Stage 0 as well. . .only difference is Stage 1 has a turboback exhaust. I also have Samco intercooler hoses so it's something like a Stage 1b setup.

Calvin
cnk is offline  
Old 02-28-2003, 07:11 AM
  #5  
VIP Member
iTrader: (1)
 
EtchyLives's Avatar
 
Join Date: Nov 2002
Location: Plymouth, MN
Posts: 2,518
Car Info: 94 T-Leg Sedan and a 00 M5
Originally posted by cnk

I also have Samco intercooler hoses so it's something like a Stage 1b setup.
I just put my IC hoses in last night (will finish my own stage 1 this weekend) and noticed a difference. I honestly did not expect much and did it more "cuz all the guys at i-club have IC hoses." Definitely worth the money (and the slight PITA of an install). Order them when you order your stage 0.
-Etch
EtchyLives is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KTW
Engine/Power - EJ20T (pre-2006 WRX and JDM)
7
07-12-2004 07:33 PM
mysube97
Suby Shopping & Maintenance/Warranty
4
01-14-2004 05:52 PM
Cend_wrx
Engine Management
9
04-05-2003 12:03 AM
mattr762
Subaru General
1
03-26-2003 11:47 AM
David@VISHNU
For Sale by Members
1
12-10-2002 07:40 PM



Quick Reply: vishnu stage 0



All times are GMT -7. The time now is 05:33 AM.