My probe keeps on backing out of my uppipe some guys have told me to pull it out ant bit a b olt in but what size is it anyone know??

thanks Miguel

PS what hapens when the hole is open with probe just sitting on it besides strang sound?

 

i didnt find any bolt that was the right size... the bolt i used was to long.. all i did to fix that was cut the bolt down with a dremel...

if the probe is out i dont know what will happen... loose of power id imagine.. but for sure youll see smoke come out thru your hoodscoop..

edgar,

 

M12x1.25

Kragen, hard to find.

Have baby in other hand so hard to type lefty,

 

thanks mister pizza

 

The shorter the better...like 20mm long. I did the same thing as edgar...only found a longer one and ended up cutting it off with a dremel.

 

Is that the same size as the 02 sensor plug?

 

now that i think about it i cut two just in case... you want it?

edgar,

 

No, the 02 is bigger. It takes a 22mm Wrench. Sorry, dont know the thread size

-freddie

 

i didn't have that hard of a time finding the correct 12x1.25 bolt but none of them were short. I also ended up cutting it in half with a dremel cut off disk. Also if theres nothing plugging the egt bung on the uppipe your car will sound like a top fuel dragster but will be really slow. Oh and you wont see any smoke coming out of your hood scoop. 6k miles after i installed my uppipe my probe worked its way out and thats when i got a bolt to plug it.

 

hum.. i got smoke from it during warm up when mine feel out... thats how i found out it came out... he he hum...

edgar,