Turboxs dual stage boost cont. help please
Thread Starter
Registered User
iTrader: (7)
Joined: Dec 2002
Posts: 2,859
From: Flying on the H1 w/ 75 psi of compression on all 4 cyl
Car Info: PnP VF30 w/ STi injectors Perrin intake walbro fuel pump w/ a TXS TBE
Hello all i have a turboxs dual stage boost controller and i hooked it up properly i think. SO the problem is on the first stage i hold boost fine at about 16-16.5 psi and then i switch to the second stage and with the screw all the way to low boost or it pretty much closed it jumps to 20psi so my autometer gauge says. I've even tried to set the 1st stage to 12psi and then the 2nd stage to 16psi , the 2nd just pegs my gauge so im clueless as to what to do know i've checked all the hoses and everything is hooked up right from what the instructions say to do. so any info on this would be great guys thank you.
Thread Starter
Registered User
iTrader: (7)
Joined: Dec 2002
Posts: 2,859
From: Flying on the H1 w/ 75 psi of compression on all 4 cyl
Car Info: PnP VF30 w/ STi injectors Perrin intake walbro fuel pump w/ a TXS TBE
yes im sure i didn't jack the boost all the way up is there anything else that it could be if i need thanks for trying though
Guest
Posts: n/a
Re: Turboxs dual stage boost cont. help please
Originally posted by mario
Hello all i have a turboxs dual stage boost controller and i hooked it up properly i think. SO the problem is on the first stage i hold boost fine at about 16-16.5 psi and then i switch to the second stage and with the screw all the way to low boost or it pretty much closed it jumps to 20psi so my autometer gauge says. I've even tried to set the 1st stage to 12psi and then the 2nd stage to 16psi , the 2nd just pegs my gauge so im clueless as to what to do know i've checked all the hoses and everything is hooked up right from what the instructions say to do. so any info on this would be great guys thank you.
Hello all i have a turboxs dual stage boost controller and i hooked it up properly i think. SO the problem is on the first stage i hold boost fine at about 16-16.5 psi and then i switch to the second stage and with the screw all the way to low boost or it pretty much closed it jumps to 20psi so my autometer gauge says. I've even tried to set the 1st stage to 12psi and then the 2nd stage to 16psi , the 2nd just pegs my gauge so im clueless as to what to do know i've checked all the hoses and everything is hooked up right from what the instructions say to do. so any info on this would be great guys thank you.
https://www.i-club.com/forums/showth...threadid=14839
In the thread, I mention how to set the Turbo XS Dual Stage Manual Boost Controller.
__________________
2002 Subaru Impreza WRX
1/4 Mile: 13.83s @ 96.85MPH (as of January 2003)
http://members.cardomain.com/uncle_dan
Dan
Thread
Thread Starter
Forum
Replies
Last Post
Scooby42
New Aftermarket Car Parts For Sale
8
Nov 18, 2004 11:56 PM
GotWRX03
New Aftermarket Car Parts For Sale
3
Sep 29, 2004 07:36 AM
BLACKWRX03
Used Aftermarket Car Parts For Sale
3
May 11, 2004 09:58 AM



