Recommended turbo
Thread Starter
Registered User
Joined: Jun 2004
Posts: 88
From: St. Kitts island in the Caribbean
Car Info: Subaru JDM Type RA
Recommended turbo
Hey wats a recommended turbo for makin at least 450 hp on the EJ20. Here's the deal i've recently installed a JEMS ecu which was giving me about 28 psi on the stock turbo, but i have a big boost problem, and i realize the actuator is releasing the pressure to early, was wonderin if the PE1820 woulf be a betta application turbo for the operation, along with upgraded injectors and a FMIC........thanx
VIP Member
Joined: Oct 2003
Posts: 297
From: Evansville, IN
Car Info: 2003 Subaru WRX Aspen White
not sure what a JEMS ecu is....but that way too much boost pressure for any normal bolt on turbo....
the PE1820 is overpriced & overrated plus it more than likely won't get you to your goal of 450hp(assuming crank hp, not wheel hp)
what model year is your car, moreso engine code? if you are running a EJ205, anything over 375-400chp will seriously lessen your engine life.
for 450chp, I'd recommend going rotated w/ a Ultimate Racing T3/T04E kit....going rotated will save you money in the long run.
the PE1820 is overpriced & overrated plus it more than likely won't get you to your goal of 450hp(assuming crank hp, not wheel hp)
what model year is your car, moreso engine code? if you are running a EJ205, anything over 375-400chp will seriously lessen your engine life.
for 450chp, I'd recommend going rotated w/ a Ultimate Racing T3/T04E kit....going rotated will save you money in the long run.
Thread
Thread Starter
Forum
Replies
Last Post
Boost Addict
Engine/Power - EJ20T (pre-2006 WRX and JDM)
25
Apr 29, 2003 01:05 PM
BluWrX.03
Engine/Power - EJ20T (pre-2006 WRX and JDM)
14
Apr 3, 2003 05:14 PM