need installation instructions for helix resistor
#1
need installation instructions for helix resistor
hey guys. ordered a helix o2 resistor from gruppe-s. missing install instructions. for '02 wrx wagon. they tried to email me the instructions but the picture didnt come out.
i did a search on the net. found a do-it-yourself guide with a diagram of the resistor and the capacitor. on his diagram, it shows the negative side of the capacitor touching the resistor, and the positive side touching the blue wire on the o2 harness. i removed the heat shrink from resistor, and its the opposite, the positive side of the capacitor is touching the resistor and the negative side isnt.
so i dont kno if the diagram is wrong, or if the Helix resistor is wrong. anyways, i have to take my emissions in 3 days. so this sux.
i appreciate any help. thanks
i did a search on the net. found a do-it-yourself guide with a diagram of the resistor and the capacitor. on his diagram, it shows the negative side of the capacitor touching the resistor, and the positive side touching the blue wire on the o2 harness. i removed the heat shrink from resistor, and its the opposite, the positive side of the capacitor is touching the resistor and the negative side isnt.
so i dont kno if the diagram is wrong, or if the Helix resistor is wrong. anyways, i have to take my emissions in 3 days. so this sux.
i appreciate any help. thanks
Thread
Thread Starter
Forum
Replies
Last Post
iyamada
Engine/Power - EJ20T (pre-2006 WRX and JDM)
6
10-17-2006 02:52 PM
My_Red_Suby
Engine/Power - EJ20T (pre-2006 WRX and JDM)
1
09-16-2004 07:21 PM
Wazup8012
Engine/Power - EJ20T (pre-2006 WRX and JDM)
12
06-19-2004 01:12 PM
1/500yellowwrx
Engine/Power - EJ20T (pre-2006 WRX and JDM)
4
03-10-2004 07:12 PM
macao_friend
Interior, Exterior & Lighting
17
01-04-2004 12:53 PM