Engine/Power - EJ20T (pre-2006 WRX and JDM) There is replacement for displacement, it is forced induction - OEM 2.0 liter turbo engines in the USDM WRX. 90-94 Legacy Turbo EJ22 turbo engines can also be discussed here.

Apexi WSII piping size

Thread Tools
 
Search this Thread
 
Old Feb 22, 2006 | 06:49 PM
  #1  
excel's Avatar
Thread Starter
Registered User
iTrader: (2)
 
Joined: Aug 2005
Posts: 979
From: los angeles
Car Info: 04 STI
Apexi WSII piping size

does anyone have the ws2 cat-back? does anyone know the piping size for it? I've seen it on a few sites and it says 65mm-65mm-80mm / 100mm tip. Does this mean it starts out with 65? or is it 80mm all the way? 80mm is like 3inch correct?
Old Feb 23, 2006 | 10:34 AM
  #2  
WRX_Mobil's Avatar
Registered User
 
Joined: Jan 2006
Posts: 16
From: San Jose
Car Info: STUD-SUBARUS
Wink Hmm..

From what your saying it look like your 65mm is a 3.25'' piping and 80mm is a 4'' pipe which is in between the connection to the mid pipe and the actuall exhuast.
and 100mm is a 5 in tip .

it seems about right . or it might be .25'' bigger than mine . i belive mines a 3'' to 4'' to 3'' and a 4.?? inch tip
Old Feb 23, 2006 | 12:13 PM
  #3  
excel's Avatar
Thread Starter
Registered User
iTrader: (2)
 
Joined: Aug 2005
Posts: 979
From: los angeles
Car Info: 04 STI
^ so you have it?

how's the HP increase, sound, and all that?
Old Feb 23, 2006 | 12:46 PM
  #4  
wvinfernovw's Avatar
Registered User
iTrader: (1)
 
Joined: Dec 2005
Posts: 130
From: Springfield, VA
Car Info: 2004 wrx
65mm is roughtly 2.5"

http://mg-jewelry.com/mmtoinches.html
Old Feb 23, 2006 | 01:32 PM
  #5  
excel's Avatar
Thread Starter
Registered User
iTrader: (2)
 
Joined: Aug 2005
Posts: 979
From: los angeles
Car Info: 04 STI
hmm, I wonder if someone has the exhaust and give a true measurement
Old Feb 25, 2006 | 08:58 PM
  #6  
WRX_Mobil's Avatar
Registered User
 
Joined: Jan 2006
Posts: 16
From: San Jose
Car Info: STUD-SUBARUS
Originally Posted by wvinfernovw
yes sorry 65mm is around 2.5. sorry about that.

thanks for the correction
Old Feb 25, 2006 | 09:14 PM
  #7  
WRX_Mobil's Avatar
Registered User
 
Joined: Jan 2006
Posts: 16
From: San Jose
Car Info: STUD-SUBARUS
mines a 3'' from cat back the one you are looking at is a 2.5 ish.(its slightly bigger than 2.5 )


i have the Apexi gt spec . its a 3'' exhaust sound very deep but not annoying at all,it gives a very deep and aggresive tone while accelrating.

my hp increase is not too noticeable , b/c its only like a 10 hp ish increase. a 2.5 piping prob has a lower hp gain .

mine has a very deep tone at idel. but not loud at all. if you have a DP it will sound very aggresive.i mean very MEAN!!.

the subaru 4H engine has its own engine ''accent'' sounding very nice ,Sounds Nothing like a I4 engine. i bet who ever own a subaru with 3'' catback/turboback exhaust system would say it the best sounding 4cyl engine they have ever heard.

ill say go with a 3'' if your looking for a nice deep tone/ with more hp increase , but if your looking for a little louder go with the 2.5.

i say after a while you get used to the tone and sometimes u cant even hear the exhaust , its up to your so yeah.....
Old Feb 25, 2006 | 09:27 PM
  #8  
05_WRex's Avatar
Registered User
iTrader: (4)
 
Joined: Dec 2005
Posts: 782
From: The Bay
Car Info: drives a STi
Originally Posted by excel
^ so you have it?

how's the HP increase, sound, and all that?
I do have the Apexi world sport II and it's not loud at all, it's around 95 decibels if not a bit higher. It has a nice rumble and gurgle once you break it in, overall I love my apexi wsII catback, the pro about this is it looks stock and you don't have to be worrying about the cops pulling u over cause it looks stock. I had this for about 4 months now and I can't think of any con. If you're looking for something not too loud go for this one, if you want something loud and aggressive I suggest go for the HKS carbon Ti catback, that will get u noticed.
Old Feb 25, 2006 | 09:32 PM
  #9  
05_WRex's Avatar
Registered User
iTrader: (4)
 
Joined: Dec 2005
Posts: 782
From: The Bay
Car Info: drives a STi
Engine Management

Anyone know if I have to get EM for having:

Apexi World sport II
HKS Sequential blow off valve
AEM cold air intake

If so, anyone know a good place, I'm from the bay area.
Old Feb 26, 2006 | 11:32 PM
  #10  
WRX_Mobil's Avatar
Registered User
 
Joined: Jan 2006
Posts: 16
From: San Jose
Car Info: STUD-SUBARUS
EM?<whats that?

exhaust manifolds??
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
blackbullet03
Engine/Power - EJ20T (pre-2006 WRX and JDM)
32
Dec 16, 2008 08:32 PM
Donnie_Doritos
NorCal Classifieds
3
Mar 30, 2008 10:57 AM
weaponRimpreza
Engine/Power - non turbo (All non turbo Imprezas)
1
Jul 1, 2007 07:11 AM
methodical
Engine/Power - EJ20T (pre-2006 WRX and JDM)
37
Mar 5, 2004 12:45 AM
supra_man
Hawaii
7
Sep 4, 2003 03:16 AM




All times are GMT -7. The time now is 04:29 PM.