max rev limit on 05
#3
Registered User
iTrader: (7)
Join Date: Dec 2002
Location: Sacramento CA
Posts: 10,029
Car Info: 02 Impreza WRX sedan
Origami posted by koggles
I was just wondering if anyone happens to know how high the ej20 can rev without floating valves or sending a rod into outer space
I was just wondering if anyone happens to know how high the ej20 can rev without floating valves or sending a rod into outer space
This is a new car for you. Are you following the factory recommendations for engine break-in as specified in your Owner's Manual?
--
0==WW==0
"…axles of evil…" - george w. bush
#4
Max Torque is at ~ 6800 so shifting below 7K is ideal. The max it can rev without the valves floating (stock engine ) should be 8500 or 9K that is if you bypass the revlimiter and fuel cut. We have gotten the EJ205 to go about 8300 but was losing power at 8K.
The redline can excede the 7k mark by only 250, case in point, My 04 EJ205, then the fuel cut kicks in and bounces off the revlimiter.
With a fully built block and heads you could thereticaly rev to about 11000, but at that point the TD04 would be useless after 6500rpm. Then again these are not Spoon Engines. And not designed to rev that high.
I personaly would not go over 8500.
The redline can excede the 7k mark by only 250, case in point, My 04 EJ205, then the fuel cut kicks in and bounces off the revlimiter.
With a fully built block and heads you could thereticaly rev to about 11000, but at that point the TD04 would be useless after 6500rpm. Then again these are not Spoon Engines. And not designed to rev that high.
I personaly would not go over 8500.
#5
Registered User
iTrader: (9)
Join Date: Mar 2005
Location: Elk Grove
Posts: 5,064
Car Info: 2006 CGM WRX
Originally Posted by BlueREX04
Max Torque is at ~ 6800 so shifting below 7K is ideal. The max it can rev without the valves floating (stock engine ) should be 8500 or 9K that is if you bypass the revlimiter and fuel cut. We have gotten the EJ205 to go about 8300 but was losing power at 8K.
The redline can excede the 7k mark by only 250, case in point, My 04 EJ205, then the fuel cut kicks in and bounces off the revlimiter.
With a fully built block and heads you could thereticaly rev to about 11000, but at that point the TD04 would be useless after 6500rpm. Then again these are not Spoon Engines. And not designed to rev that high.
I personaly would not go over 8500.
The redline can excede the 7k mark by only 250, case in point, My 04 EJ205, then the fuel cut kicks in and bounces off the revlimiter.
With a fully built block and heads you could thereticaly rev to about 11000, but at that point the TD04 would be useless after 6500rpm. Then again these are not Spoon Engines. And not designed to rev that high.
I personaly would not go over 8500.
#6
Registered User
iTrader: (2)
Join Date: Feb 2006
Location: Baja Oregon
Posts: 1,900
Car Info: '05 Impreza Outback Sport ~ "WTF! Two-Toned?"
Originally Posted by koggles
I was just wondering if anyone happens to know how high the ej20 can rev without floating valves or sending a rod into outer space
Yup, when it stutters, it's time to shift. Who needs the STI audible warning????
#7
Originally Posted by midnitewrx02
since when is max tq at 6800? max tq is usually 3500-4000 rpm and max hp around 6k (stock n e ways)
It looks like I got my numbers a bit mixed up.
Thread
Thread Starter
Forum
Replies
Last Post
pwn
Engine/Power - EJ25T (STI and 2006+ WRX)
5
07-04-2007 03:55 PM