Engine Building Services at DBTuned.
Thread Starter
iClub Silver Vendor
iTrader: (25)
Joined: Nov 2002
Posts: 15,494
From: Participating in some Anarchy!
Car Info: 2005 LGT wagon
Engine Building Services at DBTuned.
When it comes time to replace, rebuild, or strengthen your Subaru's engine, DBTuned offers many options to chose from; OEM stock to stroker kits are all easily & quickly performed.
We maintain a stock of most performance engine parts, such as:
*Wiseco Pistons
*ACL Bearings (Yes, we actually have these very hard to get bearings!)
*Supertech valves
To help minimize your vehicle's down time, most engine rebuilds can be done in one week; bring your car in Monday morning...drive away Friday afternoon.
Presently, we are averaging 1.5 engine builds every week.
Here's an example of a current engine build that we're doing for a customer.
We maintain a stock of most performance engine parts, such as:
*Wiseco Pistons
*ACL Bearings (Yes, we actually have these very hard to get bearings!)
*Supertech valves
To help minimize your vehicle's down time, most engine rebuilds can be done in one week; bring your car in Monday morning...drive away Friday afternoon.
Presently, we are averaging 1.5 engine builds every week.
Here's an example of a current engine build that we're doing for a customer.
Registered User
iTrader: (23)
Joined: Apr 2009
Posts: 5,436
From: Bay Area 925
Car Info: 2018 Tacoma TRD PRO
To help minimize your vehicle's down time, most engine rebuilds can be done in one week; bring your car in Monday morning...drive away Friday afternoon.
Presently, we are averaging 1.5 engine builds every week.
How do you feel about the JDM 207? Ever put one in a customers car?
Presently, we are averaging 1.5 engine builds every week.
How do you feel about the JDM 207? Ever put one in a customers car?
when my engine finally goes, I know where to get a new one.
Registered User
iTrader: (23)
Joined: Apr 2009
Posts: 5,436
From: Bay Area 925
Car Info: 2018 Tacoma TRD PRO
Thread Starter
iClub Silver Vendor
iTrader: (25)
Joined: Nov 2002
Posts: 15,494
From: Participating in some Anarchy!
Car Info: 2005 LGT wagon
Depending on set up, yes, machining is factored into the timeline.
We usually have three EJ257 blocks cleaned, inspected, machined, and ready for assembly at any time.
Most of the time, we'll have a long block built up ready to go before the customers car arrives. All head work is completed, valve lash set, etc.
Obviously, some projects will take longer. In these cases, we will keep the wait to an absolute minimum.
We usually have three EJ257 blocks cleaned, inspected, machined, and ready for assembly at any time.
Most of the time, we'll have a long block built up ready to go before the customers car arrives. All head work is completed, valve lash set, etc.
Obviously, some projects will take longer. In these cases, we will keep the wait to an absolute minimum.
Churro Aficionado
iTrader: (38)
Joined: Feb 2008
Posts: 54,661
From: IG - @thomas.teammoist
Car Info: IG - @TEAMMOISTOFFICIAL
Thread Starter
iClub Silver Vendor
iTrader: (25)
Joined: Nov 2002
Posts: 15,494
From: Participating in some Anarchy!
Car Info: 2005 LGT wagon
Torque wrenches are essential for any engine job.
The many various seals, o-rings, and gaskets that are used assembling a Subaru engine.
If your motor has a rod knock, you'll get a new oil pan and oil cooler. Also pictured is a heavy duty oil pump pick up tube.
The many various seals, o-rings, and gaskets that are used assembling a Subaru engine.
If your motor has a rod knock, you'll get a new oil pan and oil cooler. Also pictured is a heavy duty oil pump pick up tube.
