putting an 04sti intercooler into 06wrx
#1
Registered User
Thread Starter
iTrader: (6)
Join Date: Jul 2006
Location: San jose
Posts: 522
Car Info: 06 wrx is gone..911 PORSCHE
putting an 04sti intercooler into 06wrx
I have an 06 wrx and i tried to put an 04 sti intercooler into it but the hose on the y-pipe was too short..what should i do...did anyone else try this?
#3
I've done it, you need a different y-pipe and a different throttle body hose. I used the Gruppe-S y-pipe kit and a slightly longer Throttle body hose from hose techniques.
http://www.gruppe-s.com/Subaru/suben...e-s_y-pipe.htm
http://www.gruppe-s.com/Subaru/subeng.htm
and...
http://www.hosetechniques.com/catalo...Gloss%20Finish
I don't remember the diameter of the hose I ended up getting though, I think it was eithe 2.75 or 3 inches. You will have to trim a little bit off the length with a scalpel, just make sure you don't trim off too much.
http://www.gruppe-s.com/Subaru/suben...e-s_y-pipe.htm
http://www.gruppe-s.com/Subaru/subeng.htm
and...
http://www.hosetechniques.com/catalo...Gloss%20Finish
I don't remember the diameter of the hose I ended up getting though, I think it was eithe 2.75 or 3 inches. You will have to trim a little bit off the length with a scalpel, just make sure you don't trim off too much.
Last edited by VIBEELEVEN; 10-29-2006 at 10:47 AM.
Thread
Thread Starter
Forum
Replies
Last Post
MindzeyeWRX02
Conversions, Transplants, & Swaps
5
01-06-2010 01:35 AM
hypnotics06
Engine/Power - EJ20T (pre-2006 WRX and JDM)
9
03-13-2008 10:33 AM
dub2w
Teh Politics Forum
5
08-25-2004 01:04 PM
Polishguy701
Engine/Power - EJ20T (pre-2006 WRX and JDM)
2
02-25-2004 01:33 AM