Adalaxy

The Lowdown:

Using the stickied thread above i am a few short steps away from finishing the swap. The only problem that i have encountered is wiring the distributor into the EJ18 harness.

So what i need to know is this. How do i wire the distributor plug in to the harness correctly. Yes i know it was mention in the thread BUT my wiring diagrams are showing different colors that what i have. So if you are knowledgeable wIth how to wire the distributor and/or need more info to go on please post. Im so close and i just want it to fire up. Or at least inform me oh the correct pin out. I just hope i havent fried my distributor wiring it wrong.

My Current wiring has it as follows. Looking at the distributor from the front of the car with the distributor mounted correctly Pin 1 is pin towards the back of the car.

Red/Grn to pin 1
Red to Pin 2 ( this is said to be pwr?)
Pin 3 i thought was ground
Blue to to pin 4

Did i break something?